Electronics Forum | Thu Aug 20 13:01:40 EDT 2009 | bman
When I've seen white strands in the solder on SMT boards, it's been fibers from stencil wipes that stuck to the stencil, then transfered to the board when it was printed. I'm not sure why this would only happen with fine pitch components though.
Electronics Forum | Fri Aug 14 11:22:20 EDT 2009 | davef
It's some time difficult to control process when using a heat gun. What is the intent of using the heat gun after test?
Electronics Forum | Fri Aug 14 10:39:08 EDT 2009 | dekedeac
I need an experienced technician in the Atlanta area to repair an Advantek ATR-1000 tape & reel machine.
Electronics Forum | Fri Aug 14 13:06:14 EDT 2009 | vinu
I HAVE ONE REFLOW OVEN FROM VITRONICS SMR610A , JUST TODAY I GOT DEFECT IN PC OF THIS MACHINE , CAN SOME BODY IS HAVING THIS MACHINE , AND SEND THE SOFTWARE FOR THIS MACHINE. PLEASE HELP US TO GET THIS MACHINE ON.
Electronics Forum | Fri Aug 21 16:15:09 EDT 2009 | drakealvarez
Define "good price". Throw out a number. Good price - One feeder around $2,000.00 & under if possible would help very much. -Aortiz
Electronics Forum | Tue Aug 25 16:35:36 EDT 2009 | drakealvarez
Universal G.S.M. single beam, head A1 (four spindle) -Aortiz
Electronics Forum | Tue Aug 25 18:25:15 EDT 2009 | swag
If you have access to a machine shop you can build your own easily using the same bolt/tooling pin pattern as tracks. Place them on a vibratory track base and disconnect or turn the vibe down.
Electronics Forum | Sat Aug 15 06:29:40 EDT 2009 | abeasia
Help, experiencing discolor of a white solder resist paint after reflow of 250 degree, it turned yellow. Have tried many paints, no luck. Anyone knows one that wouldn't change color and holds the white nicely? Thanks for your support in advance.
Electronics Forum | Sun Aug 16 19:46:48 EDT 2009 | abeasia
Hi Dave F. Thanks for the suggestion, will give it a try. With Appreciation, ABE.Asia
Electronics Forum | Sun Aug 16 04:47:43 EDT 2009 | zhengjb
Any acceptance criteria for hot bar soldering finishing? e.g. IPC-A-610? or anything else?