Electronics Forum | Tue May 11 16:25:06 EDT 2021 | dontfeedphils
Anybody have a tool for expanding ranges in Excel? (Example, for converting reference designators listed in a single cell as R1-R100 to R1 R2 R3 R4... etc). I used to use a tool named refinate, but it's no longer supported by the developers and it
Electronics Forum | Fri May 14 16:49:17 EDT 2021 | winston_one
Agree with WiIIR and also can recommend to play with vaccum pump RPM . Slower vacuum increasing have help me to resolve one problem caused by the vacuum (it was solder splash from BGA balls, but the reason can be similar to your case). Also check i
Electronics Forum | Mon Jun 07 23:39:00 EDT 2021 | glasscake
Never mind I reread your question and realized my mistake. Your best bet is just to either get more labor to rework and up your output that way or to make a custom machine that has the hot air nozzles fixtured and timed. Then load up multiple boards
Electronics Forum | Fri May 14 14:58:02 EDT 2021 | daisymu
I already understood thank you very much. In fact, between the oven and the AOI we have a conveyor that measures around 6.5 ft. Only in this case we set the time of the line so that the process was efficient, now that the AOI increased its loading an
Electronics Forum | Wed May 19 20:45:34 EDT 2021 | compit
The black pad (washer) should be complete with the valve. I have replaced the floppy drives a long time ago :). Software - do you have the optimization of the program in the machine !!! The only thing I use additionally is "PCB Synergy" to import f
Electronics Forum | Thu May 20 15:58:36 EDT 2021 | rsatmech
My product has 2.4Mil and 3.1Mil stencil. For both the stencil my SPI specification is set as 30% to 160% How this is calculated. Can anyone enlight me. Solder Paste type 5. Minimum opening is 0.16*0.18mm in stencil.
Electronics Forum | Tue May 25 15:39:56 EDT 2021 | jamesatqkits
Hi Bukas, thanks for taking the time to respond. Drive is in good shape, everything seems OK. The first thing I did was make a copy of the drive. I should check all of the PCB's and make sure they are seated properly. The Samsung part of the assembl
Electronics Forum | Tue May 25 18:49:30 EDT 2021 | bukas
you need constant 4-6 bar pressure and 200 N liters of air if I remember correctly. dont forget to run calibrations. default system password is 1 after each head calibration you need to update machine in calibration menu and menu before that or it
Electronics Forum | Mon May 24 16:08:43 EDT 2021 | robl
Can you have the SMT lines or feeder carts as "stock locations" on your system and issue them to that location? then at least when you go to your pick list you'll know where it is. That's assuming you can do this quickly.
Electronics Forum | Mon May 24 17:01:22 EDT 2021 | emeto
The good solution is to adopt ERP system and barcode tracking for everything you have in inventory. If not, SMT supervisor will keep super complicated excel sheets to track what is where..... Or.. you can request all to be kitted together and confirm