Electronics Forum | Wed Mar 06 20:46:31 EST 2024 | erikfriesen
Does anyone else calibrate Samsung CP feeders? I've done a handful here on my machine, I wonder what the proper way to do this is. Set the rear stop first, then the front notch point? They seem to need to be together, but its a bit cumbersome to g
Electronics Forum | Fri Mar 08 15:23:15 EST 2024 | tommy_magyar
They have a software called JaNets to do that. I only briefly worked for a couple of months with Juki, but JaNets did what you are asking for. Most likely you will need licence from Juki for that. Regards, Tom
Electronics Forum | Mon Mar 11 12:58:31 EDT 2024 | denism
Hi Dima, A past job used a PSE 300 from KOLB for 10 years. With proper maintenance, no problems were found. DST InJet was used in another production. As far as I know, there were no problems either. DST also has an interesting option, such as measuri
Electronics Forum | Mon Mar 11 14:36:05 EDT 2024 | jergod
Thank you! Parmi is on my list because it has close support and service but i have been also hearing some bad user experiences from it. Koh Young seems to be really good option, only bad thing i have heard about it has been software bugs but maybe
Electronics Forum | Tue Mar 12 11:00:34 EDT 2024 | dontfeedphils
Couldn't tell you for sure as it's been 4+ years since I used the PARMI and 7+ since I've used the Koh Young. I was unimpressed with the repeatability of the laser based PARMI system and I was always impressed with just about everything from Koh You
Electronics Forum | Wed Mar 13 22:06:51 EDT 2024 | alexv
If I remember correctly (this is going back to 2016-2017), the Yamaha AOI can share the P&P component library, from P-Tools. And, it will share error data with the Yamaha P&P and printer. And, it was a pretty good machine, even by itself. Koh Young a
Electronics Forum | Fri Mar 15 21:20:18 EDT 2024 | compit
Check out Yamaha - also old. A large number of parts (the same machines under the Assembleon, Philips brand), cheap feeders, many parts suppliers. Models from 2 to 16 heads, e.g. Emerald-X can accommodate 84 INDEPENDENT 8 mm feeders.
Electronics Forum | Mon Mar 18 09:04:46 EDT 2024 | carl_p
Sounds like your talking very low volume & component counts really... I would look at Panasonic AM100 for example - low cost, high flexibility but you would need multiple so you could pair it with another... Ideally we would need to understand your
Electronics Forum | Tue Mar 19 11:38:55 EDT 2024 | jergod
Thats true. But of course there is still differences between machines even all top brands are capable of doing inspection. We are looking best machines for use and price is not critical. Seems like in general Koh Young is leader, but as we have Yamah
Electronics Forum | Tue Mar 19 12:24:16 EDT 2024 | carl_p
I wouldn't focus on the brands at all. you want the best features that meet your needs by the sounds of it. Koh young will be able to do a feedback loop to your current machines as well as their own brand. Maybe look into the reps of theirs in your