Electronics Forum | Thu Sep 12 09:29:22 EDT 2013 | ericrr
The person who told me the information was the "technical" partner who used to own half the company, & owned the machine and rented back to the company, about the time he retired, who had has hand in more than one electronic industry pie, over his wo
Electronics Forum | Sun Sep 15 04:45:22 EDT 2013 | jandon
Cleaning and lubrication requires maintenance training. You can really break something if you don't know what you are doing. For example you can break your expensive rubber nozzles or cameras with inappropriate cleaning. Check: - Piping and joint -
Electronics Forum | Mon Aug 19 10:25:19 EDT 2013 | jaimebc
Using ERSA Ecoselect. I am curiuos to hear from other selective solder users as to what is the ideal lead lenght for your application on thru hole components. Shorter leads have helped us decrease solder bridges. We find ours to be from .75 mm to 1
Electronics Forum | Thu Aug 29 15:09:23 EDT 2013 | bvdb
Hi, Yes, there is a board marked "Memory Board" but it does not actually contain any memory. The memory card is attached to the CPU card. The board marked "Memory" is a board that allows you to plug in a Compact Flash (CF) memory card which we do
Electronics Forum | Fri Aug 23 00:27:07 EDT 2013 | comatose
I have an AP25 printer, which has served us fine for years. A couple days ago the top quarter of the vision display went all "wiggly" and now it won't find fids. The PC and monitor are fine, so its definitely something in the vision system. Before
Electronics Forum | Wed Aug 28 21:47:22 EDT 2013 | nophsem
HI! We have a QUAD 4C since 8 months . Yesterday the head remained immobile in the position where it put the last component to complete a board and indicates Motor Error # 5 (SRX engine communication time-out) and I don’t know what it means and ho
Electronics Forum | Fri Aug 30 11:31:29 EDT 2013 | nophsem
We have two QUAD 4C working in tandem. 3 months ago the EPCU battery (QUAD # 2) died, then we change it. Then downloaded the MODs from the controller to the assembler(does simultaneously on both machines). All this time we continue to work normally.
Electronics Forum | Tue Sep 03 05:37:06 EDT 2013 | bobpan
It sounds like your dispenser has a problem....The default mod code for 56 is 0 (this should be off). Thats why when you cleared the mod codes the machine was able to home. When you reload your saved mod codes it is probably set to 1. The machine wil
Electronics Forum | Fri Aug 30 22:14:58 EDT 2013 | isd_jwendell
I have used the 850's previous version (and other batch ovens). The current specified was AFTER the unit was at operating temperature, not what it took to warm up. If you have power restrictions, like I do, be careful with this model. Having used ba
Electronics Forum | Fri Aug 30 22:51:14 EDT 2013 | cvogel
IPC-J-STD-001E in regards to Ionic Cleanliness standards states less than 1.56 µg/cm² of total NaCL. Assuming a typical electronic process which involves smt, wave, and post-hand soldering and uses NO-Clean flux throughout all process, is it typi
