Electronics Forum | Mon Sep 14 21:31:33 EDT 2020 | dwl
Does the flickering go away once the oven reaches its set temperature? It will draw a lot more current while its warming up then when its running. Are your lights running on one leg of the same 415 VAC circuit? Reflow ovens are mostly resistive loa
Electronics Forum | Tue Sep 15 17:03:18 EDT 2020 | edvardvojvoda
Hello! We have a DEK Horizon 03i paste printer. When we load a new program at change over, most of the time it lost the reference point for the camera axes. After that the fiducials coordinates changed automatically to minus values. The service said,
Electronics Forum | Thu Sep 17 15:21:50 EDT 2020 | lpbro
For height, I start +-2mil usually. For 3mil stencils, my lower limit starts at 1.5mil, upper is 5. If the area is chem ethed, I normally add .5 to the stencil height. My default volume is 60 - 160%. Then print specs are adjusted till I see fit, then
Electronics Forum | Fri Sep 18 15:47:15 EDT 2020 | majdi4
Hello guys , For our SPV machine (Printing machine) , am looking for flexible support pin or some other idea to support PCB during second printing process ( Double side process) . We actually using ( 1: stainless steel support with voids for mount
Electronics Forum | Tue Sep 22 22:15:05 EDT 2020 | stephendo
I seem to remember using a system similar to this one. http://production-solutions.com/redesetmanuallock.php The one I saw had the supports spring loaded and free when you first brought the support up to the board. Then you used an Allen key at the
Electronics Forum | Tue Sep 22 13:51:23 EDT 2020 | makersan
Hi If anyone uses a label feeder in yamaha ys12f model p & p machine, Can it tell you how to connect the machine with the label feeder? The label feeder we will use is in the link below. https://label-feeder.com/wp-content/uploads/2015/07/Product-
Electronics Forum | Thu Sep 24 12:59:59 EDT 2020 | davef
If whatever is preventing the leads on your component from wetting is oxidation, cleaning the component will not help. Consider trying a more active flux prior to soldering. Understand from your supplier the potential complications that may affect
Electronics Forum | Wed Sep 23 13:44:57 EDT 2020 | emeto
Hello SMT bear, 1. Is the embossed tape the correct tape for the component? Sometimes packaging services might use wrong tape if part was sent for tape and reel. CAn you tell us what package the component is? What tape is it packaged in? 2. Feeders
Electronics Forum | Wed Sep 30 21:48:13 EDT 2020 | kylehunter
> If you could change the design, a 2x25 1.27mm > pitch surface mount connector is a standard part > from Wurth. Samtec also do versions in any pin > count you might desire, with locating pins, > without, with picking clip etc.
Electronics Forum | Thu Dec 17 15:53:32 EST 2020 | dwl
for option 3, if you place the connectors on the first pass then flip the board, won't the protruding leads interfere with second pass stencil printing? My vote would be to overprint onto the solder mask. you can print pretty far and still have it w