Electronics Forum | Fri May 06 06:54:56 EDT 2022 | jojoled
I have JUKI KE760L, and did notice that, when In "Feeder data " I select feeder position say 20, it enters XYZ coordinates for "pick coordinates" for example X=-260, Y=-25, Z=-1, which I need to "correct always by camera (it is slightly shifted).....
Electronics Forum | Mon May 09 21:07:53 EDT 2022 | kurtiss
Currently we have a line running a MPM Accuflex. We are working on setting up a second production line and are in need of a new stencil printer. The two machines available within budget are a MPM Momentum and a Ekra X6. We have been happy with the MP
Electronics Forum | Wed May 11 17:25:22 EDT 2022 | SMTA-64387687
You've replaced the sensors and cleaned any grease residue inside the Midas head, and you're still getting this error. You can check the connector on the little board, on top of the Midas, where the flex cable plugs in. I don't remember, off the t
Electronics Forum | Wed May 11 20:25:38 EDT 2022 | mikevb
Thanks. Yes, I replaced the ffx board with a new one and made sure everything is cleaned. I did check the flex cable connect as I removed all of that to test continuity between everything. It all checked out continuity wise. I also tried to disable t
Electronics Forum | Fri May 13 19:33:37 EDT 2022 | alex22
Hi Chris. Thanks for sharing these details. We are working with Cree XP-G3 LED (3535). We bought urethane nozzle from CoT (recommendation from Cree), but it didn't solve problem of LED sticking to nozzle. Cleaning nozzle with isopropanol (other recom
Electronics Forum | Sat May 14 00:10:30 EDT 2022 | cbeneat
Alex, I can tell you from experience it took a great deal of experimenting with settings when we first started running these. Our best course of action if the settings aren't making a difference, is the blow off. I've had it, let's say pretty high as
Electronics Forum | Tue May 17 01:32:34 EDT 2022 | sarason
Another method would be to do a screen dump on a Juki 2070,2080 machine, but that gets you back to the chicken and egg scenario. My program PCBSynergy doesn't reverse out the board file from a machine file while Ealead does . Also the programs EPU, F
Electronics Forum | Mon May 23 21:30:31 EDT 2022 | jojoled
I am looking for recomendation for best paste printer (or paste dispenser) whoch can inspect the solder paste after printing AND it can be used for simple 2D inspection of assembled PCB too (AOI)... I dont have space for 2 machines now , so both feat
Electronics Forum | Tue May 24 07:51:43 EDT 2022 | spoiltforchoice
Doesn't exist. True Solder Paste dispensing is a Mycronic only solution with Essemtec coming behind with slightly less cpapbility. With Essemtec you can have one machine that prints and places, that saves space, with Panansonic you can have machines
Electronics Forum | Tue May 24 11:31:53 EDT 2022 | joost
We bought a second hand Saki Voyager AOI machine, all the systems seem to be working but I need to import data to start scanning for errors on pcbs. Now we have never worked with an AOI machine and are at a loss What I think I need is: solder past
