Electronics Forum | Thu May 12 11:02:48 EDT 2005 | deyo
I've looked at a lot of AOI's in the past couple years. First and formost KEEP IT SIMPLE! Second clamp the boards down this will aid in keeping the camera feild of veiw stable, most that I've looked at this was an option not a stock feature. Also sid
Electronics Forum | Wed May 11 11:36:43 EDT 2005 | rlackey
Hi Peter, There is no Silver in it, which even in small quantities (0.3%-4%) improves solderability. I would try and see a demo on a similar machine to yours with a similar product as everyone can get their solder to look great in lab/showroom site
Electronics Forum | Tue May 17 03:48:51 EDT 2005 | Base
YV100, easy... YV112 uses a dual work-area, dual gantry machine in which the gantry does X and the PCB-table does Y movements. Also each gantry can only work on one PCB work-area and can pick form only one side of the machine. Basically you have two
Electronics Forum | Sat May 14 17:25:20 EDT 2005 | fastek
"What can be done to create economical advantages over here is review the product flow and eliminate process steps with current existing technology. Process steps that can safely be eliminated are cleaning, visual inspection, post wave assembly etc.
Electronics Forum | Mon May 16 11:45:35 EDT 2005 | PWH
Agree with PDE. We have two GSM's and we get this error often. Palm down e-stop when you get this error message. Machine will drop nozzle bank down after doing some segment repairs. Open covers and make sure nozzles are seated in reference to ali
Electronics Forum | Tue May 17 16:46:52 EDT 2005 | davef
Most placement machine equipment suppliers offer software for line balancing. What's with Fuji? Fujitrax is a system developed in order to attain high levels of "progress management, quality management & traceability" over several SMT lines, throug
Electronics Forum | Tue May 17 08:00:26 EDT 2005 | Bob R.
We went through this with one PBGA supplier recently and they were able to get the problem under control by fixing some of their molding processes that were inducing residual stresses. You can really see it in a thermal moire where you measure warpa
Electronics Forum | Tue May 17 10:11:54 EDT 2005 | russ
I would use a foam fluxer since spraying rosin will make the stickiest nastiest mess you can imagine. 18 layer board huh? You will want convection preheat, both top and bottom preheaters, preheat tunnel of at least 4-5', a chip wave, laminar flow w
Electronics Forum | Wed May 18 04:17:05 EDT 2005 | kvanzill
Hello All, I recently accepted a position in a manufacturer in Mauritius and they have begun a little more then a year ago COB process which I am unfamiliar with and needing some help. We are using aluminum wire, the machine is Dias Automation model
Electronics Forum | Wed May 18 18:36:22 EDT 2005 | global
Ok here's one for ya. We have a DEK 260 with a Cyberbectic vision system, 1 of about only 50 made as told to me by a DEK service Tech. So if anyone has operated one of the other 49 you may be able to help. The Service techs at DEK are not familiar en
