Electronics Forum | Sun Sep 15 03:42:41 EDT 2013 | sarason
I think _a class=roll > href="http://www.quins.de/Quins-ENGLISH/Software/Q > E_Software/Quins-easy-Software.html" > target="_blank"_http://www.quins.de/Quins-ENGLISH/ > Software/QE_Software/Quins-easy-Software.html > _/a_this might achieve what
Electronics Forum | Sat Sep 14 23:45:44 EDT 2013 | jandon
How many operator/technician/engineer do you recommend for following SMT assembly line to achieve good uptime and smoothly running quality inspection, NPI process, tehcnical support and maintenance at the same time: - Single shift, 8 hours/day - Pri
Electronics Forum | Wed Sep 18 14:12:40 EDT 2013 | pjchonis
Hello Bachman. SAC305 is the most common lead-free solder alloy, not only for wave soldering but also selective. Most of our selective customers (especially automotive) are using SAC305. What is more important than the alloy to consider is the flux
Electronics Forum | Thu Sep 19 18:10:53 EDT 2013 | spoiltforchoice
Don't let quoted speeds affect your decision too much. Send copies of pick and place files for actual products you intend to build and ask for simulated placement rates that would be achieved. Our machine has a rated max placement rate of 15,000cph a
Electronics Forum | Fri Jan 10 00:52:46 EST 2014 | mmdashti
Dear Madam/Sir; 1)Unfortunately after some installations and commissioning SMT and THT machines from Beijing Torch (Termway) company in Iran , the quality and operation of these machines seems so so... bad in quality. Because we have some advertise
Electronics Forum | Sun Jan 12 09:29:20 EST 2014 | spoiltforchoice
Subtle spamvertising there. Lower Cost small machine brands worth looking at are probably: Mechatronic Intelligent Drives (UK only?) TWS Autotronik or their Manncorp branded models in the USA Fritsch Innotech Heeb (a virtually invisible market share
Electronics Forum | Thu Sep 19 10:22:14 EDT 2013 | rgduval
With the Pb-Free BGA on there, you'll want to use pb-free solder paste for assembly. The logical course of action would be to use Pb-free solder paste for the entire assembly, and to reflow at the temperatures necessary for the BGA and Pb-free paste
Electronics Forum | Thu Sep 19 11:02:17 EDT 2013 | hegemon
If there is only a single lead free BGA on the BOM, I would suggest a "hybrid" profile. Use regular solderpaste (SN63/pb37) and peak your temperature at around 225C. Allow a bit longer TAL to let the two solders co-mingle at the BGA joints. You are
Electronics Forum | Wed Sep 25 13:25:13 EDT 2013 | nophsem
Hello bobpan: The machine is a QUAD 4C I turn on the machine and get the error: SRX AUTOBAUD Motor error #5 I removed the battery and then put it back in, the error remains. I removed the battery without put it back in...and turn on the machine,
Electronics Forum | Thu Jan 16 22:59:04 EST 2014 | comatose
As far as OEMs go, Universal themselves are pretty reasonable about second-user support. Its only $500 to register an older GSM, and their factory field service people aren't any more expensive than many competent smaller companies. You do have to bu
