Electronics Forum | Mon Apr 05 17:22:14 EDT 2004 | davef
Frank Zomber Ren� advised "Chomerics T405" above in this thread http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=27744 Searching the fine SMTnet Archives will give contacts, like: http://www.smtnet.com//forums/index.cfm?fuseaction=view_t
Electronics Forum | Mon May 10 11:24:33 EDT 2004 | Charly
Encounter solder ball crack after reflow, found the solder ball is out of shape after reflow, cross section view found that the solder mask opening is not good ( when we do comparason with diff. supplier substrate.) Does the solder mask shape will af
Electronics Forum | Mon Jun 07 21:26:03 EDT 2004 | davef
First, voiding is a process indicator. Next, as you say, the profile is a significant contributor to void formation. Finally, when considering the "material factors" that drive void formation, solder paste formulation is the most critical. Discuss
Electronics Forum | Tue Jun 15 11:20:34 EDT 2004 | Vic
Hi Guys, Can you give me a good bird's eye view in Verifying First Off via ICT Test. We currently verify our first off via naked eye for just the solder joint quality, orientation of parts etc. Aside from open and shorts, what can ICT verify? how c
Electronics Forum | Wed Jun 23 12:29:49 EDT 2004 | jdumont
The RTX-113 is the model we were looking at. If we decided to go with this one we would be getting the software. What were you hoping to be able to do with the angle view that you cannot do now? We were also looking at the small hand held inspecti
Electronics Forum | Tue Aug 10 15:07:41 EDT 2004 | jbabson1
This could also be caused by a bad PD. What vision are you using for the Resistor Networks? I am assuming the you are talking about small flat packs about 3.3mm x 1.6mm? I use vision type 12 and just use the body size. (wide view). And 100% cam speed
Electronics Forum | Thu Dec 02 17:42:35 EST 2004 | resslerr
The best solution is to use a software tool which offers program optimization, feeder set-up and line balancing even if different machine types are in the same line. Check out the leading solution provider: http://www.timmsweb.com In my view, your
Electronics Forum | Wed Jan 05 15:17:36 EST 2005 | rogerwilson
I'd be interested to hear people's views on the following please: I have a board that has both THT and SMT on it. I have to remove one of the SMT devices and replace it with a small module. The shape of the module is such that the connection legs ar
Electronics Forum | Thu Jan 13 16:16:37 EST 2005 | Grant
Hi, It is a bit hard when you want to get clear answers from people on their experience when a manufacturer jumps in, because it skews the thread. Is there anyone using an XP chip shooter? What do they think? I really like the design of it, and th
Electronics Forum | Tue Jan 25 13:28:51 EST 2005 | Ron Stubblefield
HELP!! I need an exploded view of the early-style (AP-20 and some 24's) camera cube. I have bought a used AP-36 and am having vision problems. I also need the cube alignment procedures if anyone has them. I already have a "C" tool. Thanks Ron ro
.gif)
