Electronics Forum | Tue Aug 01 15:39:10 EDT 2023 | ushir
Good Day Would anyone be able to kindly assist with the install files for the Easy Coat (ECXP) Software used on an Asymtek C-740. Our PC crashed and we are trying to reinstall. Thanks!
Electronics Forum | Wed Aug 02 01:50:34 EDT 2023 | ttheis
Another +1 for 4tech. We're getting service from them on our universal machines and they have been great to deal with.
Electronics Forum | Wed Aug 02 01:55:34 EDT 2023 | ttheis
The issue ended up being the nozzle changer; Andy from 4tech noticed that the changer was rising unevenly when he measured it in the raised position from the frame rail. He disassembled and cleaned the changer mechanism and the issue was resolved wit
Electronics Forum | Wed Aug 02 03:07:43 EDT 2023 | cbeneat
We use NPM and CM machines. What we've seen is the part will stick to the top tape on occasion and get flipped, either upside down, or reverse. Adjust the tape/cover so the top tape is pulled while the part is still under the cover. This is usually t
Electronics Forum | Wed Aug 02 14:48:06 EDT 2023 | davef
In addition to this posting, consider submitting an RFQ to equipment suppliers here: https://smtnet.com/mart/index.cfm?fuseaction=rfq
Electronics Forum | Wed Aug 02 04:35:48 EDT 2023 | ttheis
We are looking for a 1990-2000 vintage 24in Dynapace conveyor with the GE Fanuc PLC similar to the one shown in the photo if anyone has one available either complete or without a PLC.
Electronics Forum | Fri Aug 04 00:11:29 EDT 2023 | clpassoni
My CP-45 has the fiducial manual correction feature disabled, how can I enable it? A friend told me that this option is DBeditor.exe, but when executing the file a password is requested, could someone help me with the password
Electronics Forum | Mon Aug 07 09:21:40 EDT 2023 | cehlen296
Is there a possibility to pocket rout on CAM350. I can currently create a rout outline of a shape, but I need the inside of the shape to be routed too. Is this possible within the software or not?
Electronics Forum | Tue Aug 08 12:57:52 EDT 2023 | serge_pirog
Good afternoon. If you provide more data, I think you can find the problem. Could you provide: part of the Gerber file, namely the stencil and BGA pad and photo of solder paste on the board after print.
Electronics Forum | Tue Aug 08 14:03:04 EDT 2023 | smith88
What thickness did you go to and what aperture size did you use. I am at 5Mil now with 35mil dia aperture
