Electronics Forum | Tue Jul 23 21:48:45 EDT 2002 | davef
Like other things, the more you pay, the better the gage. I'm not sure which Cyberoptics unit you're considering, but LSM has a lousy gage [R&R ~25%]. We use a microscope with lousy gage that costs waaay less than some laser guided thing. Search t
Electronics Forum | Wed Jul 24 18:44:10 EDT 2002 | Juan Ruiz
Ok Guys, I really appreciate your answers. we are using the LSM 300, so I'm going to check about the software you mention in order to check if this could help.If you have any other idea, please let me know. By the way, I didn't think that somebody w
Electronics Forum | Tue Jul 23 14:55:06 EDT 2002 | colnat
I am looking for defect rates on hand soldering. Specifically - I have a large number of wire jumpers that need to be hand soldered across two boards (connectors are not an option). I am looking for a defect rate so I can perform a cost analysis in
Electronics Forum | Tue Jul 23 15:41:31 EDT 2002 | habs24
Does anyone have any information or experience soldering of class 3 products with WS fluxes. We are currently leaning toward Alpha WS609 flux, however the customer's interpretation of J-Std-001C feels that type 'H' fluxes (WS) are not allowed. Any
Electronics Forum | Tue Jul 23 18:54:16 EDT 2002 | carln
Is anybody "successfully" cleaning adhesives from the DEK Pump Print stencils? Yes, Dave, I have searched the archives only to find comments ranging from easy to very difficult to clean. However, nobody states what process they are using. What ch
Electronics Forum | Wed Jul 24 07:30:09 EDT 2002 | jax
Seems to me you might want to be talking to your board shop. Items like score depth and reconfiguring the panel should probably be discussed. If this is a labor only job I would discuss the problem with your customer, in turn, he can talk to the boar
Electronics Forum | Wed Jul 24 12:09:29 EDT 2002 | deonnc
Hey guys, Anyone out there have any luck finding after-market Philips Topaz vacum ejectors and air valves. I am looking for a source that may supply these. I tried the manufacturer directly but Philips has a proprietary design with Koganei which wil
Electronics Forum | Thu Jul 25 10:52:26 EDT 2002 | waynesmith
I've been tasked with increasing the CCA throughput in our Conformal Coating workcenter. My first approach will be to look into a more *automated* approach for the masking process. We currently use a manual method of using masking tape prior to con
Electronics Forum | Mon Aug 04 10:28:55 EDT 2003 | jseagle
Dave, Where can I get the rubber boots you are talking about? We are going to have to start doing 100% conformal coating of boards for some of our customers in high volume, we currently only do a selective coat. We currently use a silicon coating,
Electronics Forum | Thu Jul 25 15:05:09 EDT 2002 | gdstanton
Looking for feedback from anyone who uses the wireless KIC2000 profiler. We just got one and so far it works pretty well. We've been able to lower thermal settings on every profile looked at. The optimizing capability is slick but it sucks up 9V DC