Electronics Forum | Thu May 31 09:53:00 EDT 2012 | rleung
Hello, I had a touchscreen failure on my MPM SPM printer. I have seen another thread in regards to changing it from touchscreen to monitor and peripheral (mouse/trackball/touchpad). I am interested in doing the change to mouse/trackball and have l
Electronics Forum | Thu May 31 22:35:23 EDT 2012 | jacktan
I have encountered PCB delam issue with high density PCB. PCB has 42 layers , 5 mm thickness ,laminate material is NelcoN4000-13EP,Tg 210C and Td 350C. Have pre-bake at 125 c for 12 hrs before assy.My reflow temp is standard with 243 peak and TAL is
Electronics Forum | Fri Jun 01 16:13:45 EDT 2012 | kahrpr
You also need to get with the PCB manufacturer. Their is a lot that can go wrong with that many layers. If the manufacture is trapping that much moisture. you may have a hard time baking it out. Dave and Graham are right about the time and energy. It
Electronics Forum | Mon Jun 04 08:53:44 EDT 2012 | mosborne1
Sounds like the boards were not properly manufactured since you have baked them prior to assembly. We just had a customer return from China becasue of this issue. We have made 10K without issue. Let me take a stab and ask if they were made in the USA
Electronics Forum | Fri Jun 01 05:46:12 EDT 2012 | vileo72
Hello friends , What is the extent of Probe mark allowed on a assembled board ? Is there any related material on net or standard .Recently we had an issue where the ICT was done and the joints on which the pins were tested had dents on the joints
Electronics Forum | Tue Jun 05 02:22:07 EDT 2012 | vileo72
Dear Dave/pr/Reese, Thank you so much for the information and this will certainly help me to align on the query .Would like to know further :During Flying probe testing the vias are also observed that they have pin mark on the annular ring due to the
Electronics Forum | Fri Jun 01 08:02:40 EDT 2012 | mlevesque
Hello everyone! We check for a new AOI system. I know a Mirtec machine (MV-2HTL), but this time we check for the MV-2GT or MV-3L. I got a presentation about the Aleader AOI and it seems to be good machine. Anyone know somethings about it? What a
Electronics Forum | Wed Jun 06 20:49:36 EDT 2012 | edri_mun
we encounter the same problem as you 3 years ago. but now we have implement to use KIC 24/7. you just need to take 1 time profile (for the base line profile), and then for the next time you run your product, it will take profile for each board you b
Electronics Forum | Fri Jun 08 16:36:58 EDT 2012 | noid
KIC 24/7 has evolved into RPI. Not only will it give you virtual profiles, it also gives you DPMO and yield, based where each board lands in the process window. The good thing about this software, you can go back a year later and look up a specific
Electronics Forum | Tue Jun 05 18:52:31 EDT 2012 | comatose
Well their demo was interesting. We're an OEM with our own product line, so the part numbers don't change much and we don't cross things often. It seems like it might do what I need for the next few years. If you're selling to upgrade, out of curios