Electronics Forum | Wed Aug 23 14:58:38 EDT 2023 | markhoch
I was at our local SMTA Michigan Chapter Tech Forum & Tabletop Expo last week and BTU was introducing a new option designed to reduce flux build-up in the heating zones. Might not be a bad idea to reach out to them to learn more about it. Just a sug
Electronics Forum | Thu Aug 31 14:15:34 EDT 2023 | compit
Hello What feeder do you use for the long connector (65-80mm) - tape feeder, tray? What nozzles? We want to mount a SODIMM200 socket. I don't know whether to look on the tape or on the trays... The MG1 spec says it will mount connectors up to 100mm (
Electronics Forum | Fri Sep 01 11:55:27 EDT 2023 | tommy_magyar
In my previous job we fitted these connectors with bespoke gripper nozzles (ASM/Siplace) from bespoke trays made for these due to the high volume. It also reduces the risk of damaging the component further in case of a reject. However, at my current
Electronics Forum | Fri Sep 22 08:22:17 EDT 2023 | linux
Hello All, This would be a question for someone with experience in PCB design, Intrusive reflow Narrow profile connector(Electrode Rectangular) L=1mm X W=0.9mm. What shape and size hole is required in the PCB to ensure sufficient solderability and re
Electronics Forum | Tue Sep 26 08:35:58 EDT 2023 | carl_p
There appears to be plenty of alignment issues going on here. As some of it matches up ok & other areas not I would think your support is not ideal & causing gasket issues. Some app sizes also look questionable to me. I would look to ensur
Electronics Forum | Tue Sep 26 07:46:49 EDT 2023 | robertanderson
A transformer winding machine is a specialized piece of equipment used in the manufacturing of transformers. Transformers are electrical devices that transfer electrical energy between two or more circuits through electromagnetic induction. They cons
Electronics Forum | Mon Oct 02 12:22:46 EDT 2023 | carl_p
Hi, I use this Material, you can get a few different types to work with certain sensors but I've used them for a solid 12 months now for reflowing. I'm using multiple board materials down to 0.4mm & I've had zero issues. https://www.datumalloys.com
Electronics Forum | Mon Oct 02 13:46:53 EDT 2023 | SMTA-72837649
If it's the same as the 32D, 2 things need to happen. Air pressure at the nozzle for atomization, and the solenoid at the bottom of the flux tank needs to open to provide a gravity stream of flux. You should be able to take both hoses off and check f
Electronics Forum | Mon Oct 02 14:46:06 EDT 2023 | davef
Lab tests can confirm the composition of your material. I'm going with tin oxide. Tin oxide changes color depending on the thickness of the deposit. Your deposit is fairly thin. It will change to a brown color as the thickness increases. Your EDX
Electronics Forum | Tue Oct 03 17:08:31 EDT 2023 | assuredtech
What Is FR4 Substrate Material? FR4, also written as FR-4, is both a name and a standard rating. The name is applied to the fiberglass-reinforced epoxy-laminated sheets used in printed circuit board manufacturing. However, the name also functions as
.gif)
