Electronics Forum | Tue Jan 21 09:39:56 EST 2014 | spoiltforchoice
http://www.graphicode.com/GC-PowerPlace this does, I had a dabble and while it does seem quite capable the learning curve is quite steep and I'd wager the price is too. As with GCPrevue, the user interface is hardly what you would call streamlined or
Electronics Forum | Sun Feb 16 05:57:02 EST 2014 | alexeis
Hi, From our experience, Gerber files are accompanied by IPC type files. These files usually have extensions: IPC, NET, 356. We have developed products that are designed to help in programming part of the SMT machine, based on these files beyond sta
Electronics Forum | Fri Oct 30 19:37:26 EDT 2015 | sarason
If you want to go down this path there is a piece of free software from a dutch programmer called Visualplace. It is available here. http://www.compuphase.com/visualplace/visualplace_en.htm If you want to work from CAD files there s my sofware call
Electronics Forum | Sat Feb 04 10:02:53 EST 2017 | mikekeens
GC-PowerPlace from http://www.graphicode.com/ will do this but takes time to get to grips with and can be time consuming depending on the design complexity and the type of data available. Ideally i recommend asking for CAD data as this will contain
Electronics Forum | Wed Jan 22 14:25:17 EST 2014 | rgduval
In the purest sense of ESD control, we would have to say yes, use ESD tape to cover the gold fingers. The gold fingers are connected directly to input/output controls for the card, and, as we all know, when handling boards, we're supposed to avoid c
Electronics Forum | Fri Jan 24 16:54:24 EST 2014 | davef
Yeh, I worked at Wang Computer factory in a reclaimed fabric mill with wooden floors. One of the causes of grapping is flux loss. In their paper, Briggs and Laskey talk about flux loss due to spreading and suggest: * Graping is much less prevalent i
Electronics Forum | Wed Jan 29 10:23:24 EST 2014 | alphatronique
Hi i have strange issue on one of my TM8FC feeder feeder seem to have 0.5 to 1mm longer that my other feeder on image above have 2 side by side picture was take on same machine slot ,and both feeder have same part separation clip i even swap cl
Electronics Forum | Wed Feb 05 21:03:35 EST 2014 | padawanlinuxero
On top of the feeder should be a small cover thats adjustable you need to unscrewed a little and move it forward to the pick up area this should give you enough space to cover the other component another thing you can try is check if all the feeder
Electronics Forum | Wed Feb 05 22:03:21 EST 2014 | alphatronique
Hi as said clip and and adjustment was not in cause if you look picture part was right at the good place so tape adjustment was good for all the 16 tape and have also replace all the 16 clip whit same result i have service any mydata feeder bef
Electronics Forum | Mon Nov 17 06:27:50 EST 2014 | garym4569
In the program editor on the machine, you can output a text file of the production data. You can select to output placement data, component data, and/or feeder setup for the product currently loaded on the machine. You can also do the same in the H
