Electronics Forum | Fri May 11 11:18:16 EDT 2007 | rgduval
Their response time here has been excellent. Then again, their main US office is only an hour away from us, so, that may skew my opinion of their response time. Cost is average. Around $120/hour, plus travel and parts. Registering is an issue. T
Electronics Forum | Mon May 07 15:46:45 EDT 2007 | Hoss
IEC 60601-1 is a UL regulatory standard for Medical Electronic Equipment. We recently ran the humidity pre-conditioning segment of this testing and have found electromigration repeatably in areas with hand soldered joints (remaining NC flux). IEC 6
Electronics Forum | Tue Nov 18 13:10:16 EST 2008 | andersenequipmentllc
I need a service manual for a Philips CSM84 type > PA1306/20. I have the PA1306/40 manual, if that > is any use to anyone. The 1306/20 was the last > model with analog servo amps and DC brush motors, > the 1306/40 was the first with AC brushless
Electronics Forum | Wed Nov 25 12:27:18 EST 2009 | andras
Here are the manuals: http://www.toldacuccot.hu/dl.php?sid=ea6f1feeba21ce26cb798edddc031c0f&file=CSM.part1.rar http://www.toldacuccot.hu/dl.php?sid=b6528b8ac0bdbbd3ee96f4f1e728e77f&file=CSM.part2.rar http://www.toldacuccot.hu/dl.php?sid=79db96a97060
Electronics Forum | Fri May 25 13:38:15 EDT 2007 | mfgengr
TAL Too Long - dull solder joints, dewetting. TAL Too Short - cold solder, insufficient wetting. You want TAL to be as short as possible (but not lower than 30 seconds), but long enough for every solder joint to be above TAL for at least 30 seconds.
Electronics Forum | Fri May 11 07:37:22 EDT 2007 | davef
IPC-A-610D 3 Handling Electronic Assemblies 3-1 3.1 EOS/ESD Prevention 3-2 3.1.1 Electrical Overstress (EOS) 3-3 3.1.2 Electrostatic Discharge (ESD) 3-4 3.1.3 Warning Labels 3-5 3.1.4 Protective Materials 3-6 3.2 EOS/ESD Safe Workstation/EPA 3-7 3.3
Electronics Forum | Thu May 10 17:33:05 EDT 2007 | bkgsmtnet
Thank You Mark!. I appreciate your time. I have contacted them for a demo. Looks like they only handle the quoting aspect. I am also looking for Scheduling, Order, Inventory management suggestions. There has got to be a software that you can define y
Electronics Forum | Thu May 10 14:12:43 EDT 2007 | smtfan
Hi folks, This is my first time posting here. So I do not know clearly if I am posting in the right place. I have two questions: 1. I would like to know your comments about the following equipment (see links): http://www.madelltech.com/MD5001.html
Electronics Forum | Fri May 18 15:07:56 EDT 2007 | jbecircuits
Thank you for all your help. I help all my customers to understand more about the production of their parts. I even build free parts using 3-4 different finishes so they can evaluate the parts. In working with CM's many of them are always asking us t
Electronics Forum | Wed May 16 11:40:11 EDT 2007 | stepheniii
I test pdb-boards on the mat it ain't work! Wrong > mount of bolts being outputted. is have something > to do witfh the rohas soulder on them? I will take a stab at translating. I test PCBs on a static mat but the test does not work. The output