Electronics Forum: vision and error and fuji (Page 1 of 4)

samsung cp40cv handler error and vision error

Electronics Forum | Mon Feb 18 08:11:27 EST 2019 | tomazicrok3

hello i have samsung cp40cv and this errors comes up can someone help me. vision communication error(1000)(1000), no sequence-finished from handler(%1), no command response from handler (0x2002).

samsung cp40cv handler error and vision error

Electronics Forum | Tue Feb 19 02:03:51 EST 2019 | bukas

try first to replace SYS folder, or one by one of its files. if that doesnt work you are looking at complete disk backup. and check disk for bad sectors ofc

samsung cp40cv handler error and vision error

Electronics Forum | Mon Feb 18 09:49:43 EST 2019 | bobpan

This is going from my memory from a long time ago...but in the scp.ini file....there could be digital light control and/or a matrix tray handler setting. I would turn them off if they are on. I believe this has something to do with a system setting.

Re: Who makes low cost vision equipment...... and sells it at low price?

Electronics Forum | Wed Sep 30 16:36:59 EDT 1998 | Dana R Simon

I've been looking for a vision system which can check our fully mounted boards containing a mix of smt and thru hole. The concepts on all the machines are virtually the same, they got about 12-16 cameras, some pcb fixing and the rest is soft

Who makes low cost vision equipment...... and sells it at low price?

Electronics Forum | Wed Sep 30 15:27:34 EDT 1998 | jvo

I've been looking for a vision system which can check our fully mounted boards containing a mix of smt and thru hole. The concepts on all the machines are virtually the same, they got about 12-16 cameras, some pcb fixing and the rest is software.

Mydata Pick and place

Electronics Forum | Wed May 09 12:07:52 EDT 2001 | caldon

My personal favorite is the Siemens F series and the UIC GSM platform. Both Siemens and UIC have awesome resources for csp, flipchip and baredie processing - Siemens= Dan Baldwin from GaTech; UIC = George Westby from UIC labs. My second choice would

Fuji GSP III machine not turning on and showing SO error

Electronics Forum | Sat Nov 07 18:38:32 EST 2020 | enzik

Hello to all, The Fuji GSP III screen printer was working well yesterday. This morning, the machine turned on and the display screen was showing nothing. I went to the back of the machine and reset one of the VM1152A. The display screen is now showi

IP1 and SSOP28

Electronics Forum | Tue May 18 16:40:22 EDT 2010 | m79d

I am having some problems getting the IP1 to place a SSOP28 package,pitch 0.65mm lead width 0.3mm. I am selecting computer vision 012 (tried 011) and vision type 100. EL data was put in looking at the datasheet and also measuring the device. Have tri

IP1 and SSOP28

Electronics Forum | Tue May 18 21:43:02 EDT 2010 | ashley

Hello mickd, 1) The EL data & Vision_type is NOT necessary when using MCS30 for IP1 machine. note : your input of the above might have cause confusion during VP, hence the OS error. 2) I would suggest the following... 2a) lower the Lead_check_are

SUZUKI Pick and Place Machine

Electronics Forum | Thu Jun 01 07:40:23 EDT 2006 | netellink

I have a Suzuki vision machine with 4 heads (SMT-1000VL). This machine is using the camera to inspect the nozzels (4 sets) in the nozzel tray changer every time it is going to change the nozzel(s) in the 4 heads. The problem I have is now the machine

  1 2 3 4 Next

vision and error and fuji searches for Companies, Equipment, Machines, Suppliers & Information

ISVI - Industrial Sensor Vision International Corporation
ISVI - Industrial Sensor Vision International Corporation

Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.

Inspection

3 Morse Road 2A
Oxford, CT USA

Phone: +1 203 592 8723