Electronics Forum: vision type for soic16 (Page 1 of 4)

Calibration method for camera

Electronics Forum | Wed Apr 07 21:49:44 EDT 2004 | Ken

My favorite kind of calibration is where the machine learns what it did incorrectly. Then fixes itself! However, there are many types of machines that rely on human feedback as to the results of what it did. nozzle calibrations involve many factors

Mydata for prototyping?

Electronics Forum | Mon Jan 14 19:22:54 EST 2002 | wsanita

The great thing about Mydata is the ability to put small strips of components on the Y-table. Takes only a few minutes to setup. I build mainly protos and small lots. The y axis is the table. The head is the x. Any problems you may have heard of were

Re: PLCC PD's for IP3

Electronics Forum | Sat Apr 22 13:54:02 EDT 2000 | JAX

What's Up Big Man, Although I agree with a few things Dean said, personally I like back-light. But since you probably won't listen to me here's is the suggested info: Lead_check area= 60% Vision type= 120 P_pattern= 34 This rest is part dependant

Zevatech FS710 for 0603 assembly

Electronics Forum | Tue Feb 10 05:58:14 EST 2015 | dberenguer

We have the possibility to buy a used Zevatech FS710 pick&place machine with vision. I've read that these machines used to be very well built but I'm wondering if it's capable to place 0603 parts accurately since it lacks a laser-type alignment AFAIK

Re: PLCC PD's for IP3

Electronics Forum | Fri Apr 21 23:12:35 EDT 2000 | Dean

Larry... I believe CCD offsets are not active on the IP3. Light levels and offsets are only availble in proper. Use Front Light. Use a P-pattern with bright lead, dark back background (I think #3)... The trick is to sample the lead width at the br

Need help for contact 3AVX

Electronics Forum | Tue Nov 01 20:40:03 EDT 2011 | mikeincal

What may be happening is an early trigger of your vacuum sensors during production due to a clogged tip or vacuum line in the head. What happens during production is that the Y axis gets into position, and then the vacuum sensor input is monitored on

Vision settings for LED - JUKI KE3020

Electronics Forum | Wed Oct 02 13:54:39 EDT 2019 | fundomikey

Hello, I have a problem with settings vision for LED (similar to this one: https://www.lumex.com/news/SML-LXIL0603-narrow-beam.html) on JUKI KE3020. The LED is mounted on the side. At the beginning I would like to say that laser recognition is impos

IP3 placement for BGA / MicroBGA

Electronics Forum | Tue Mar 17 16:09:25 EDT 2009 | gregf912

For the IP3 to reliably place BGAs the machine needs the 4800 vision card and type 12 camera. From the problems i see here you must have the 4400 card and a type 8 or 9 camera. It would also seem that a calibration is in order. I have calibrated and

Re: SMT Programming - Parts Database set-up for contract manufacturer

Electronics Forum | Fri Feb 11 12:21:44 EST 2000 | Finepitch Services

Doug, What I've done in past was calling them as 1206T.5, 1206T1.0, SOIC16, RESNET16, SOIC16T5.0, ALCAP4, ALCAP5 etc. T means thickness but for the ALCAP case 4 means 4mm diameter. If you have the time and patience, having a board and attaching a s

IP3 placement for BGA / MicroBGA

Electronics Forum | Tue Mar 17 11:13:26 EDT 2009 | tegel

Hi, Now it was a couple of years since I did this but it's possible. I have been down to 0.5 mm pitch. If you have a vision system with vision type 230 I would suggest that you use that. One other trick is to only specify 50 % of the ball diameter.

  1 2 3 4 Next

vision type for soic16 searches for Companies, Equipment, Machines, Suppliers & Information

ISVI - Industrial Sensor Vision International Corporation
ISVI - Industrial Sensor Vision International Corporation

Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.

Manufacturer

3 Morse Road 2A
Oxford, CT USA

Phone: +1 203 592 8723

Solder Paste Dispensing

High Resolution Fast Speed Industrial Cameras.
Sell Used SMT & Test Equipment

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...
Voidless Reflow Soldering

High Throughput Reflow Oven
PCB Handling with CE

World's Best Reflow Oven Customizable for Unique Applications


"回流焊炉"