Electronics Forum | Wed Mar 23 12:10:04 EST 2005 | dphilbrick
Has anyone out there done any lead free testing using a Vitronics Unitherm 500 oven? based on the specs I have dug up on the machine I suspect it should work fine but it would be great to hear from someone that has done it. Thanks in advance.
Electronics Forum | Fri Oct 26 13:43:54 EDT 2012 | whispell
Make sure your machine configuration is correct. You may have something assigned to the machine that is no longer there. For 24V check to make sure all of the E-stop jumpers are plugged in.
Electronics Forum | Fri May 15 14:50:40 EDT 2015 | emeto
My top 3 printers: 1.DEK 2.MPM 3.EKRA Top 3 ovens: 1. BTU 2. Vitronics 3. Heller or Electrovert
Electronics Forum | Wed May 20 11:13:45 EDT 2015 | josealatorre
1. DEK 710 for Screen Printing 2. Fuji NXT for Pick and Place 3. Vitronics XPM3i Oven
Electronics Forum | Fri May 15 10:12:21 EDT 2015 | capse
I'm the Rep for Vitronics Soltec and ASYS EKRA in the southeastern US. I suggest you take a look at Vitronics ovens. The AutoSet feature makes new profile development as easy as possible without buying a third party accessory, The new EKRA user inter
Electronics Forum | Thu Mar 24 09:53:03 EST 2005 | aj
Doug, We are getting ready to do some trials at the moment. I have profiled the oven and achieved the Required Temps. that would be desirable. I dont envisage any problems what so ever aslong as who ever is doing the profile fully understands the
Electronics Forum | Mon Dec 17 02:08:21 EST 2007 | mun4o
Hi, I have a lot of solder bridge in our wave soldering process.We use SACX0307 and Surf 11 flux.the SW mashine is Vitronics delta 6622.Itry to change flux and termoprofile but results is not god.Can you halp me - recommend me some flux or other adv
Electronics Forum | Fri May 15 12:41:48 EDT 2015 | deanm
I chose a Vitronics XPM3i primarily for the AutoSet automatic profile generation feature. We are high mix and simply cannot profile every board. The AutoSet feature is quick, easy and we rely on it 100% and have great results. These ovens have had ve
Electronics Forum | Fri May 22 17:48:48 EDT 2015 | aemery
It's your first line, go with established manufacturers. Whether new or used it ultimately comes down to does the tool do the job and how well is it supported (labor/parts) if it does break down. I am a former field eng. with Speedline and now run
Electronics Forum | Fri May 15 21:39:48 EDT 2015 | jlawson
Reflow.. 1.Rehm (Germany) - Best in Class Best overall process stability heating system ( Alot of makers have started to copy there VX heating arrangement ). COnveyor chains can be a bit more attention in terms of maintenance on rehm , but if foll
