Electronics Forum: vitronics delta wave solder pump (Page 1 of 4)

vitronics delta backplate

Electronics Forum | Wed Feb 06 02:14:43 EST 2008 | mun4o

Hi, we use Vitronics Delta 6622 solder wave.I try to adjust high of backplate, but I don't know whether the adjustment is correctly.Now, when the frame enter in the main wave, solder flow in the same direction as PCB.But when the frame go above main

vitronics delta Wave solder software version fail

Electronics Forum | Tue Sep 17 13:58:56 EDT 2013 | smtventasmex

i have a vitronics Delta 6622CC with a software fail, i turn it on and when i open the software on the CPU, it enter but show me a message of wrong vertion, and then i choose ok and software close it self, let me know if some one of you have this fai

estop error wont go away on vitronics delta max

Electronics Forum | Fri Jun 15 12:07:13 EDT 2018 | fern

My company is hooking up a delta max wave solder machine but we can seem to get the estop error to go away any one have a any experience with this issue.

Seho 1135C Wave Solder can't generate sufficient delta wave height

Electronics Forum | Thu Sep 26 23:14:25 EDT 2013 | zsoden

We picked up this old (circa late 80s) Seho 1135 machine last year for next to nothing. It needed a bit of TLC to bring it back to working order but it's 99% working now. The only problem left is that we cannot get sufficient height from the delta wa

wave soldering and solder bridge

Electronics Forum | Mon Dec 17 02:08:21 EST 2007 | mun4o

Hi, I have a lot of solder bridge in our wave soldering process.We use SACX0307 and Surf 11 flux.the SW mashine is Vitronics delta 6622.Itry to change flux and termoprofile but results is not god.Can you halp me - recommend me some flux or other adv

Vitronics Delta wave 6622c problems

Electronics Forum | Mon Oct 19 05:16:56 EDT 2015 | florintoma

Hello all, I have a problem with the wave 6622c . The temperature of solder pot and preaheating zones 1 and 2 is not increasing. the strange thing is that the machine is not display no error. Can you help me with some advices?? regards

Vitronics Delta wave 6622c problems

Electronics Forum | Tue Oct 20 10:14:59 EDT 2015 | aemery

Florin, Not sure if this will be helpful or not, but I have completed a couple of pot height retrofits for these waves and I seemed to remember that one of my clients spilled some solder and shorted out the 24vdc power supply. I am pretty sure this

Wave solder flow over back plate

Electronics Forum | Fri Feb 22 13:19:54 EST 2013 | caurbach

Our new Soltec Delta 3 has this feature (they call it mainwave pushup) where you can add up to 60 rpm to the pump after the leading edge passes over the wave. Unfortunately, our old Delta Wave doesn't have this feature. Ideally we'd like to set it

Waves soldering: not enough solder remaining on pads

Electronics Forum | Tue May 23 02:41:37 EDT 2017 | zsoden

Thanks Bukas. I've actually gone to a lot of trouble over the past 24 months to completely clean, rebuild and adjust the pump and nozzle assemblies and even through all of that we've still never been able to get theoretical maximal wave height from t

Waves soldering: not enough solder remaining on pads

Electronics Forum | Mon Jul 31 20:34:58 EDT 2017 | zsoden

Hi all, it has been a bit of a delay but I've finally had a chance to do some further investigation on this. First off, we spend some time to clean the solder bath using Kester Solder Saver and scooped out a lot of crap. We then added about 5kg of

  1 2 3 4 Next

vitronics delta wave solder pump searches for Companies, Equipment, Machines, Suppliers & Information

Void Free Reflow Soldering

High Resolution Fast Speed Industrial Cameras.
Selective Soldering Nozzles

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...
Voidless Reflow Soldering

High Throughput Reflow Oven
PCB Handling with CE

World's Best Reflow Oven Customizable for Unique Applications


"回流焊炉"