Electronics Forum: vme (Page 1 of 12)

Universal GSM 630 VME vision fault

Electronics Forum | Wed Aug 31 17:23:00 EDT 2016 | corepride

Hi everyone, I have a problem with the 630 VME vision system: during startup machine, an error popup appears saying "Did not receive request to load machine model within timeout period. Possible machine error condition exists. Do you want to continu

SM411 Initializing machine I/F

Electronics Forum | Sun Aug 13 22:31:58 EDT 2023 | cspasol

Hi! I have encountered this problem so many times. Here are the possible cause of your machine problem. 1. PCI board or PCI to motherboard cable. 2. VME memmory card. 3. VME board itself. 4. Power supply for VME board. Hope could help.

GSM VME upgrade options?

Electronics Forum | Sat Feb 17 13:15:09 EST 2007 | gregcr

Hi All, We have a handfull of GSM's here and some are newer than others. I was wondering what the options are as far as upgrades to the VME chasis. We have our oldest running with EPC-4, EPC-5, EPC5A and so on.... Can newer EPC units be used in t

GSM software upgrade

Electronics Forum | Wed May 20 07:51:42 EDT 2009 | Jeff

We have a GSM1 with version 1.4. The machine has the old VME chassis. So to upgrade the software (to use enhanced component setup) the VME chassis has to be upgraded. We had UIC in last year to look at this and they would upgrade the VME and software

GSM1 Ethernet Card EXM-10A location in VME rack

Electronics Forum | Tue Dec 01 23:24:34 EST 2015 | ttheis

Can anyone advise if the EXM-10A ethernet card is the correct model for a GSM1 machine vintage 1995 and which slot in the VME rack it should populate? Thanks

Universal GSM 630 VME vision fault

Electronics Forum | Fri Sep 02 09:10:20 EDT 2016 | ttheis

Probably similar cost to find one on ebay or a used machine broker vs. repair unless the fault is obvious from visual inspection. I would be interested to know if anyone does service cards from these older VME chassis though.

Hanwha Samsung SM320 Failed to Start Mark5 SW - VME broken ?

Electronics Forum | Sat Mar 11 22:07:35 EST 2023 | recard

Hi Duro. The problem is that my VME card and ISA card was tested in another machine and both are working. So I suspect the CAN boards or Motherboard.

GSM VME upgrade options?

Electronics Forum | Tue Feb 20 06:31:58 EST 2007 | mika

It depends on what VME box build it is. Rev. C, D, E etc. There are upgrade kits for the complete VME chassi and it includes some re-wiring also. For this You must contact UIC and provide them with the machine ser.nr, current Os-system, UPS s/w ver.

GSM machine stops randomly; "BM" bus master light out

Electronics Forum | Tue Dec 22 00:11:41 EST 2020 | ttheis

Well it seems you are onto something with the vme power supply. The issue has resurfaced and I did notice the LED's on the keyboard went out when the issue occurs. I looked at the power distribution board to the left of the vme and it shows the +12V

Hanwha Samsung SM320 Failed to Start Mark5 SW - VME broken ?

Electronics Forum | Tue Dec 13 21:38:14 EST 2022 | duro

Stephen, there is one CMOS battery on PC board. I haven't check it, but time and date on PC is correct, so I guess it should not be problem. On VME controller is another CR2032 battery (based on VME datasheet it is for some RAM memory). That battery

  1 2 3 4 5 6 7 8 9 10 Next

vme searches for Companies, Equipment, Machines, Suppliers & Information