Electronics Forum: waiting for cvi (Page 1 of 8)

Timeout waiting for nozzle changer vacuum buildup.

Electronics Forum | Tue Sep 05 11:09:09 EDT 2017 | emeto

The message might still be correct. Change the pneumatic cylinder on the nozzle changer - I have seen these to go bad.

Timeout waiting for nozzle changer vacuum buildup.

Electronics Forum | Tue Sep 05 10:14:41 EDT 2017 | swag

Try a fid teach on your changers. I don't recall how to do it but you'll find it pretty easy if you surf around. Also, the seals on the nozzles must be good and soft. If you can still get them new, I'd replace. Same goes for seals in changers. C

Timeout waiting for nozzle changer vacuum buildup.

Electronics Forum | Fri Sep 08 22:37:30 EDT 2017 | ttheis

If you have two changers and only one head, make sure there is only one open port (one changer should be filled up and the other should have one open hole.) The head should be full of nozzles as well. As you mentioned go into the diagnostics and act

Timeout waiting for nozzle changer vacuum buildup.

Electronics Forum | Fri Sep 01 09:54:02 EDT 2017 | gsmx4321

I get a Timeout waiting for nozzle changer vacuum buildup failure every time I go to run my 1998 GSMx machine. The problems seems to be that once in a while (it seems to be random) the spindle does not line up exactly in the center of the nozzle cha

Timeout waiting for nozzle changer vacuum buildup.

Electronics Forum | Tue Sep 05 14:40:08 EDT 2017 | rgduval

We emailed off forum about this...and I'm wondering how things are progressing. As I noted in email, our issue was the nozzle change was resulting in too many nozzles being out of the same vacuum channel on the tool box. I can't remember how it was

GSM1 zero - timeout waiting for spindle up error

Electronics Forum | Fri Sep 14 19:55:06 EDT 2018 | amartineck

I have a GSM1 that when try to zero it, it stops with the "Timeout waiting for spindle up" message. To get thsi up and running, I have set all my machine settings to default and had to reselect the head from a C4 1 head to the flex head. I initially

Siemens Siplace 80S15 causing Line Controller to hang up, and 80S15 keeps waiting for machine data from Line controller

Electronics Forum | Wed Mar 11 15:16:27 EDT 2020 | sportsradar

Here is a few pictures. IMG_20200311_151400 shows the screen on the LC everything is fully booted on the LC before the machine is turned on. IMG_20200311_151350 shows the Siplace 80S15 waiting on LC IMG_20200311_151320 this screen is displayed when

Siemens Siplace 80S15 causing Line Controller to hang up, and 80S15 keeps waiting for machine data from Line controller

Electronics Forum | Mon Mar 09 16:27:46 EDT 2020 | oxygensmd

Sadly, without line controller software you won't be able to load jobs to your machines. Check your mails later.

Siemens Siplace 80S15 causing Line Controller to hang up, and 80S15 keeps waiting for machine data from Line controller

Electronics Forum | Wed Mar 18 16:15:49 EDT 2020 | emeto

Katrina, if the machine will zero on its own, there is nothing wrong with machine itself. You can now look into network cards in both line computer and line PC.

Siemens Siplace 80S15 causing Line Controller to hang up, and 80S15 keeps waiting for machine data from Line controller

Electronics Forum | Mon Mar 09 16:28:48 EDT 2020 | sportsradar

Hello Sarason, Unfortunately the machine is no longer supported and we are such a small company we can not afford to replace this machine. Thank you for your advise, I will check for additional parts stuck in the machine (long shot but worth the time

  1 2 3 4 5 6 7 8 Next

waiting for cvi searches for Companies, Equipment, Machines, Suppliers & Information

SMT feeders

Have you found a solution to REDUCE DISPENSE REWORK? Your answer is here.
Void Free Reflow Soldering

Software for SMT placement & AOI - Free Download.
2024 Eptac IPC Certification Training Schedule

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.
best pcb reflow oven

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...
Hot selling SMT spare parts and professional SMT machine solutions

Internet marketing services for manufacturing companies