Electronics Forum: washers (Page 1 of 35)


Electronics Forum | Thu Aug 05 11:37:24 EDT 2004 | Andrew

I was told by the customer to change the screw with washer to a screw without washer as the washer causing the overlay Lexan Material underneath the washer to bulge.What should I be looking at to make this change?Can I just use the same screw without

Inline Washers

Electronics Forum | Thu Feb 27 09:40:19 EST 2003 | jseagle

Hi, I am looking for opinions on closed-loop inline washers. We use water-soluble paste and flux, most of our boards are double-sided, and our finest pitch is 16mil, but we will be doing BGA, uBGA, and possibly flip chip in the future. What would

Dish Washer for BGA Cleaning

Electronics Forum | Thu Apr 08 10:11:27 EDT 2004 | Dreamsniper

Hi Guys, Have you tried using a standard dish washer for cleaning PCB's with BGA's. What detergent or cleaning chemicals did you used? I wonder if it will work to clean a WS Flux PCB using the dish washer then get it rinsed by an old aqueou cleaner

Dish Washer for BGA Cleaning

Electronics Forum | Mon Apr 12 07:50:21 EDT 2004 | wgaffubar

We use a dish washer system with good success. The only issue is foaming, sometimes this can be a problem. We have be experimenting with antifoaming chemicals. Some success. I would suggest a dish washer system that has ionic system in the wash pump

Inline Washers

Electronics Forum | Thu Feb 27 14:32:54 EST 2003 | davef

Alan is spot on.

Inline Washers

Electronics Forum | Mon Mar 10 16:16:29 EST 2003 | Tim Chistianson

Good note about in Line washers. Can you tell me a little more about the Wave machines, may be what models did you worked on, and what you liked or did not like about them. Thanks, Tim

Mesh for board washer baskets

Electronics Forum | Thu Jun 17 18:34:27 EDT 2004 | Eagle44

We once used a padded mesh in our board washer baskets to prevent damage to components. Can anyone tell me where I can find this material? Thanks

PCB Cleaner/washer suggestions

Electronics Forum | Wed Oct 06 11:06:04 EDT 2004 | JB

I am looking into a pcb washer/cleaner for misprints etc. If you are using one, which would you recommend? We use no clean solder and will use lead free in the future. Thanks

SMT Stencil washer machine

Electronics Forum | Thu Jul 12 18:21:37 EDT 2007 | arburgos

We are considering buying a new stencil washer machine. We stencil print boards with NC solder paste and in the near future Lead free solder paste. I'd like to hear your experience with this equipments and what you recommend.

Small footprint washer with heating elements

Electronics Forum | Tue Jul 15 14:16:18 EDT 2008 | dwelch123

I'm not looking for a batch wash but for a small{ 15 foot or less } washer with heating elements at dry station, any suggestions?

  1 2 3 4 5 6 7 8 9 10 Next

washers searches for Companies, Equipment, Machines, Suppliers & Information