Electronics Forum | Wed Jul 29 08:05:25 EDT 2009 | patrickbruneel
Deni, You also need to check if your flux is properly wetting the board. Flux dewetting on the surface can also cause webbing. You can check that with spraying flux on the board surface and watch the wetting behavior. Patrick
Electronics Forum | Fri Jul 31 02:59:52 EDT 2009 | dj_jago
I can't open the picture but if it is webbing and you are running with an alcohol based flux (non VOC free) another thing to check is the Specific Gravity.
Electronics Forum | Tue Aug 26 17:02:10 EDT 2008 | allwave
What brand of flux and wave solder machine are you using? George
Electronics Forum | Tue Feb 16 16:28:30 EST 1999 | Tuffty
| | Can anyone help me with the pros and cons of trying to wave | | solder tantalum and large (1812) ceramic capacitors. I do | | know that one may see fractures on larger cermaic caps, but have not seen much on the tantalums. Any insight as to what
Electronics Forum | Wed Jan 12 13:57:28 EST 2005 | russ
Are you positive that the solder is sticking to the bottom of the fixture OR is it pushing the wave down so far that the solder is "squirting" out from underneath the pallet. This happens when deep/thick pallets are run at the same wave height as a n
Electronics Forum | Wed Jul 09 19:05:06 EDT 2003 | randywomack
LOZ. Under-cured or out-of-spec(sloppily) applied resist is realistic. What other physics: Shiny resist surface is more prone to balls then matte finish. How about an operator eating fish & chips before handling the boards. Don't laugh... ... saw th
Electronics Forum | Thu Nov 15 13:50:03 EST 2007 | wavemasterlarry
I also consult in all matters wave related. i have a degree from Soltec college and am now a CWMT (Certified Wave Master Technocologis). WaveMAsterLarry@yahoo.com
Electronics Forum | Tue Sep 11 12:56:03 EDT 2007 | jsloot
Can anyone give me any information on the longivity of titanium insert wave pallets. What I am looking for is the integrity of thin walls over several hundred cycles and the interface between the insert and the durostone material.
Electronics Forum | Mon Nov 12 07:58:55 EST 2007 | ksrsr
George, Who do you purchase your wave pallets from. Our vendors has not perfected this attachment yet and I need to get a source. Thanks, KSRSR
Electronics Forum | Thu Nov 15 13:27:29 EST 2007 | slthomas
Chad's a good guy and also has decent taste in music from what I recall.
