Electronics Forum | Thu Jul 06 12:26:55 EDT 2006 | Chunks
Sounds like your flux to me. Since you cannot change the board or the machine, changing flux would be one question mark you could take away with a phone call and a sample. You will really be surprised how different fluxes can affect your final prod
Electronics Forum | Fri Feb 21 07:14:59 EST 2020 | bk
I would always have top and bottom preheaters in a solderwave machine. Even if you can make it work without them, it's better to heat both sides of a board then just one. Far less stress on the parts you are soldering. Plus you may need it one day fo
Electronics Forum | Wed Dec 10 05:06:20 EST 2008 | gregoryyork
Great as most Lead Free machines have the wrong angle on them 7 degrees is correct. So you are still exiting the wave in the middle of the pot then.
Electronics Forum | Mon Oct 19 05:16:56 EDT 2015 | florintoma
Hello all, I have a problem with the wave 6622c . The temperature of solder pot and preaheating zones 1 and 2 is not increasing. the strange thing is that the machine is not display no error. Can you help me with some advices?? regards
Electronics Forum | Mon Nov 05 00:51:58 EST 2007 | omidjuve
We have a problem with soldering of a 96 pin header connector(9001-11961c00l1a from kingmate) we use 3 different wave soldering but in all of the machines we have many short circuit between the pins . the wave soldering machines that we use is fr
Electronics Forum | Fri Jan 28 10:09:50 EST 2000 | mike d
Istvan, One possible reason for this is that you are using a water soluble flux in your wave solder machine. If you are and the boards are not pre heated long enough, the water in the flux does not evaporate before hitting the wave. When the water
Electronics Forum | Mon Oct 27 09:47:39 EST 2003 | yiannis
hi, Are there users of Aura - a wave soldering machine of Automation ?. I d like to buy a copy of the manuals and to ask a few questions. Thanks
Electronics Forum | Fri Jun 16 14:54:21 EDT 2006 | jbrower
Howdy Bolo, I see. I currently run a 5 zone 1500 Heller, It's a very nice reflow oven and one of my favorites. Hopefully in July we will be getting in our 1700 from Heller. These reflow ovens (used) can be had for a pretty decent price at least in
Electronics Forum | Thu Jan 12 04:14:17 EST 2006 | Rob
The most prevailent wave solder machine in small to medium UK companies is the Blundell CMS400 - every man and his dog has one. And the recommended lead free solder for these machines is..... Greg's 0.3% Silver. Quite a few of our customers use h
Electronics Forum | Mon Jun 19 13:56:59 EDT 2006 | netellink
Bolos, Why you have to purchase the Titanium solder pot for your lead-free? I have the MDS-200 Unit Design Drag solder and I just empty the solder SN63PB37 in the solder pot, clean it very well and buy lead-free solder bar to fill up the pot. David