Electronics Forum | Thu Aug 08 11:28:34 EDT 2013 | simplycomplex85
I found a manual for a slightly newer version of my machine and it explained some of the terms that I wasn't familiar with. That helped. Also it seems a slightly newer version of the YTV-2000 series has TH built right in. Mine just doesn't. I playe
Electronics Forum | Wed Mar 23 05:17:23 EDT 2011 | arwankhoiruddin
Hi All. I want to know what is the IPC/JEDEC standard for solder paste printing defects. From the brochures of SPI Machines, the recognized defects are excessive, insufficient, misalignment, no solder, bridging, and solder shape error. What document
Electronics Forum | Thu Jul 21 08:27:05 EDT 2005 | grantp
Hi, Yes, that's an idea, but from my experience with MYDATA, it would fail test, and the machine would either know it's lost the component, or it would not know, and the component would not be on the pad because the machine would think it's mounted
Electronics Forum | Tue Dec 30 20:14:30 EST 2014 | jeff701
We've actually bought a second FX-D, which is intended to mainly handle smaller, higher-volume boards. That will still serve to improve throughput. But at the same time, we're also adding another pick'n'place machine which has a rated speed that's 2
Electronics Forum | Thu May 10 16:11:46 EDT 2012 | comatose
I have a rarely used Wenesco that's about 4 years old that I would be willing to get rid of. Its filled with lead free solder. We just bought a full size automatic selective solder machine which arrives next month, so we'll go from using it once in
Electronics Forum | Mon Nov 12 08:42:59 EST 2001 | madreindeer
HI, I would say around 80Kv 5-8um focalspot should be OK. Check systems like CR Technology,Phoenix,FeinFocus these are nice systems. There is low cost system Glenbrook any good I do not know. Good luck, MadReindeer
Electronics Forum | Mon Nov 12 11:05:43 EST 2001 | vbutani
You can get systems at various performance levels depending on your budget. The low cost systems are a great way to start off and then you can upgrade to a higher performance unit when you move to finer pitch components. Check out the VJ-1000LP at h
Electronics Forum | Wed Nov 14 10:23:51 EST 2001 | gzweig
This question and other issues on x-ray inspection of BGAs are addressed in the free PDF. publication available by e-mail entitled: Rapid and Effective X-ray Inspection of BGAs using "Signature Identification" Just place "send publication" in subj
Electronics Forum | Thu Apr 11 10:14:05 EDT 2002 | BTaylor
We use the ASC vision master 212, our customers wanted a height and volume measurement rather than an inspector doing a visual. We have added this machine to our process, checking height on many preprogrammed locations then this generates a X bar and
Electronics Forum | Tue Jul 19 11:53:04 EDT 2005 | CLampron
seaK, Check your PCB Thickness check in your program. See if it is checking the PCB at this location. Each board the machine will check to find the baseline thickness of each board run. It does this with a tool. I'm thinking this may be it because I
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774