Electronics Forum | Mon Oct 09 14:30:44 EDT 2006 | Brian
I agree with Chunks. Programming was much simpler. The 2D inspection is much better on MPM. I didn't have to use offsets on the MPM or the DEK very often, but did more on teh DEK. I didn't like the front justified stencils on the DEK. I also did
Electronics Forum | Thu Apr 26 12:06:08 EDT 2007 | basem
$100K for this entire line. We are thinking of getting a Chinese made reflow oven that looks pretty good at $25K. Also, we need to deposit solder using a dispenser as stencil printing will be reserved only for higher volume boards. It will not be pra
Electronics Forum | Fri Jan 04 07:54:24 EST 2008 | benzy1961
My experience has been very different from the other responders. We put an in-line system in place about 3 months ago and the results have been pretty eye-opening. We were astounded to see how many prints were actually bad once we started inspectin
Electronics Forum | Mon Aug 18 15:03:38 EDT 2008 | awegener
I'd like to get more information about pick and place nozzles. How can I learn more? ... What do the nozzles look like? Are there different shapes? Are custom nozzles sometimes used for custom parts or are the nozzles mostly standardized? What kind
Electronics Forum | Fri Oct 10 11:36:53 EDT 2008 | stevea
Please visit http://www.ascinternational.com to view all the products offered by ASC International. The LaserVision SP3D is the most economical SPI system in the world offered at a base price of only $14,995. The VisionMaster series of products off
Electronics Forum | Thu Aug 27 10:22:59 EDT 2009 | dwl
We have an opportunity to purchase a Yestech YTV-1000 AOI machine. I am looking for opinions on how well they work and how they compare to the newer Yestech B3 AOI systems. We are a high mix, low volume EMS company. We do not currently have any exp
Electronics Forum | Mon May 10 11:49:16 EDT 2010 | hegemon
A huge help in the very first statement, Josh. And yes, fixed vapor mass in the machine I am currently evaluating. OK, and a machine that can change the vapor volume based on a calculation of mass of the assembly sounds logical. (whirrrr,click... a
Electronics Forum | Wed Dec 07 13:10:32 EST 2011 | conjugate
Hi Reese, the contamination is coming from the material of the PCB itself. Basically, there`re failure observed in the products from electronics factory. preliminary analysis been done, the main board not properly functioning due to bad solder. next
Electronics Forum | Fri Feb 17 11:48:25 EST 2012 | davef
Here's a link to an earlier thread on SMTnet that may add something to the conversation http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=20871 Allowing fabricators to X-Out boards is a bad idea. * X-Outs are randomly placed * Machines can
Electronics Forum | Fri Aug 31 13:51:33 EDT 2012 | joeherz
First off - There should be no issue with washing your OA/water soluble boards with the other customer's no clean units provided that the recipe being used has been validated to effectively clean each product. If your supplier is using a batch syste
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774
