Electronics Forum | Wed Dec 28 06:37:27 EST 2016 | luciano
Dear Anshang38, I actually don't have a profiler in order to get a new profile. I adjusted the machine once a coulpe years ago and did all regular maintenance and cleaning and it kept working fine until some weeks ago. I've changed all the flux and
Electronics Forum | Tue Jan 10 10:48:10 EST 2017 | snevermind
I have a colleague trying to keep a piece of old equipment alive for a little longer. Web searches haven't been very helpful due to the age of the equipment. The latest listing I found was placed in 2013. Does anyone have a machine that could be p
Electronics Forum | Thu Feb 16 02:03:36 EST 2017 | soldertraining
Reflow ovens and wave solder machines come in a huge variety of flavors and price points. These machines tell the story of impressive features and capabilities such as flux management, gas flow management, static pressure control, active cooling zone
Electronics Forum | Mon May 22 09:35:07 EDT 2017 | emeto
There is one lead that is a total miss. I think you are too low with the wave there - you are barely touching the board. I would say first look at your wave height. If you have the possibility to change the angle of the wave(if there is a backplane t
Electronics Forum | Tue May 23 02:41:37 EDT 2017 | zsoden
Thanks Bukas. I've actually gone to a lot of trouble over the past 24 months to completely clean, rebuild and adjust the pump and nozzle assemblies and even through all of that we've still never been able to get theoretical maximal wave height from t
Electronics Forum | Tue Jun 06 11:47:33 EDT 2017 | stevezeva
Hi Zac, was that board finished with tin/lead HASL or leadfree/HASL? Also what type of flux were you using? Just because a board is fresh out of sealed packaging doesn't necessarily mean that it's going to solder well. The picture that I've attached
Electronics Forum | Thu Jun 08 16:33:47 EDT 2017 | sumote
This may not be a solution to your problem, but something from my tuner car days jumped into my head. If you are running at 100% and not getting the height you need, change out one (or both) of your pulleys. A bigger pulley at the motor side, or a sm
Electronics Forum | Fri Sep 08 12:03:24 EDT 2017 | rameshraja
Hi, I need the RF 800 Flux Acid titration procedure and also require EPT of the same to add thinner ( RF 800 additive), i.e we are using the flux rf 800 for our wave soldering process having foam fluxer , after 2 hours we are taking sample from the
Electronics Forum | Thu Nov 30 00:41:23 EST 2017 | abhilash4788
Dear All, I have OSP finsh pcb on my production, the pcb thickness is 1.5mm and the product is one sideded pcba. After reflow process, Is there any specific time frame defined for smt completed OSP finish pcba before going for wave soldering proce
Electronics Forum | Wed Jan 10 04:33:05 EST 2018 | spoiltforchoice
Simulating with what? In developed countries manual labour is expensive but is also still the most common solution to fitting though hole parts, even if the board are then wave-soldered. Mixing SMT and THT on what sounds like a very simple product wi