Electronics Forum: wave and pump and inverter (Page 1 of 2)

wave soldering and solder bridge

Electronics Forum | Mon Dec 17 12:06:58 EST 2007 | pjc

5 Steps to Eliminate Bridges: 1. Establish (wave) Parallelism First and foremost, you must establish board-to-wave parallelism. This is the prerequisite to any wave solder process control. For an understanding of the power of this approach go to ht

Conveyors and bar code

Electronics Forum | Wed Aug 23 14:59:32 EDT 2006 | bill

I�ve been lurking on the forum for a while so I will take a stab at this, mainly because there is no answer I take it that you have a variety of boards being produced at the same time and are in fixtures so the conveyors don�t need to be adjusted, a

SMT and TH board carrier

Electronics Forum | Fri Aug 27 10:25:52 EDT 1999 | Matthew Park

Is it feasible to have one type of board carriers to take boards thru 1) glue curing process for first side and 2)invert carriers with boards, and 3)reflowing second side, and 4) do manual stuffing of th components and 5) take them thru selective wav

Re: WAVE SOLDERING and Gluing 0603 packages

Electronics Forum | Sat Apr 24 08:23:03 EDT 1999 | Bubba

Surprisingly enough, ever since the addition of an omega wave, we solder those often-troublesome SOT23's just fine and dandy.. anyways, long-term, well be getting a universal GDM which uses positive displacement pumps..currently we're using fuji g

Re: WAVE SOLDERING and Gluing 0603 packages

Electronics Forum | Fri Apr 23 15:33:50 EDT 1999 | C.K.

Has anyone had trouble waving and gluing 0603 R's and C's? At my company, our designers have "opened the floodgates" on bottom-side 0603's. We've got an EPK+ with rotary chip and omega wave but can't seem to get skip-free soldering on t

Re: SMT and TH board carrier

Electronics Forum | Wed Sep 01 13:58:10 EDT 1999 | Dave F

Is it feasible to have one type of board carriers to take boards thru 1) glue curing process for first side and 2)invert carriers with boards, and 3)reflowing second side, and 4) do manual stuffing of th components and 5) take them thru selective w

Re: WAVE SOLDERING and Gluing 0603 packages

Electronics Forum | Fri Apr 23 15:04:44 EDT 1999 | M.T.

Has anyone had trouble waving and gluing 0603 R's and C's? At my company, our designers have "opened the floodgates" on bottom-side 0603's. We've got an EPK+ with rotary chip and omega wave but can't seem to get skip-free soldering on t

Re: WAVE SOLDERING and Gluing 0603 packages

Electronics Forum | Fri Apr 23 14:59:14 EDT 1999 | Chrys Shea

Has anyone had trouble waving and gluing 0603 R's and C's? At my company, our designers have "opened the floodgates" on bottom-side 0603's. We've got an EPK+ with rotary chip and omega wave but can't seem to get skip-free soldering on these g

Re: WAVE SOLDERING and Gluing 0603 packages

Electronics Forum | Mon Apr 26 09:18:27 EDT 1999 | C.K.

Has anyone had trouble waving and gluing 0603 R's and C's? At my company, our designers have "opened the floodgates" on bottom-side 0603's. We've got an EPK+ with rotary chip and omega wave but can't seem to get skip-free so

Re: WAVE SOLDERING and Gluing 0603 packages

Electronics Forum | Sun Apr 25 12:05:50 EDT 1999 | Chrys Shea

Has anyone had trouble waving and gluing 0603 R's and C's? At my company, our designers have "opened the floodgates" on bottom-side 0603's. We've got an EPK+ with rotary chip and omega wave but can't seem to get skip-free solderin

  1 2 Next

wave and pump and inverter searches for Companies, Equipment, Machines, Suppliers & Information