Electronics Forum: wave and solder and pallet and shot (Page 1 of 3)

gloves used for wave soldering and pallets

Electronics Forum | Thu Sep 20 12:20:45 EDT 2007 | jsloot

What kind and what brand of gloves are people using for handling hot wave solder pallets? My operators are going through a pair a week. I need something better. Thanks

gloves used for wave soldering and pallets

Electronics Forum | Thu Sep 20 20:07:24 EDT 2007 | davef

As sources for heat resistant gloves, try: * National Safety Apparel * Radnor

gloves used for wave soldering and pallets

Electronics Forum | Fri Sep 21 10:33:56 EDT 2007 | russ

we use welders gloves with cuffs. there are some other heat gloves out there as well, we like the durability of leather though Russ

gloves used for wave soldering and pallets

Electronics Forum | Thu Sep 20 12:37:10 EDT 2007 | hussman

As long as your operator is grounded, a pair of welders gloves is fine. The leather kind do not build up static and do last a while. If the same pair of gloves is being used for dedrossing the wave, pay special attention to loose fitting gloves. I

Selective soldering pallets and solder balls

Electronics Forum | Tue Dec 10 14:10:38 EST 2002 | Randy Villeneuve

Steve, I wave solder most if not all our boards with selective wave pallets. I did not catch if the solder balls were on top of the board or on the bottom but that will make a difference on what to do to get rid of them. Pallets are good and bad. On

Wave solder pallets: lead and lead-free process

Electronics Forum | Wed Jul 27 15:54:44 EDT 2005 | Hiram

Hi everybody, We have wave solder fixtures made of Durapol and multiple wave solder machines. Most likely we�ll use the same pallets for either tin-lead or lead-free solder for a while (of course after washing the pallets). Should we test the palle

Selective soldering pallets and solder balls

Electronics Forum | Fri Dec 06 18:13:15 EST 2002 | slthomas

We only have solder balling problems in the interface of the pcb with the selective soldering pallet. All other boards (single, and double sided glue and waved alike) are fine, so I'm not thinking this is going to follow the normal path for resoluti

Selective soldering pallets and solder balls

Electronics Forum | Mon Dec 16 17:35:43 EST 2002 | davef

Jim Consider issuing a purchase order to your assembler for the purchase of selective wave soldering pallets required to solder your board. That way, you: * Own the pallets. * Can take the pallets with you should you decide that another assembler

Wave solder pallets: lead and lead-free process

Electronics Forum | Wed Jul 27 16:27:57 EDT 2005 | GS

It may be you should look for higher TG of Durapol Rgds GS

Selective soldering pallets and solder balls

Electronics Forum | Mon Dec 02 12:52:40 EST 2002 | slthomas

We're trying a selective soldering pallet for the first time with mixed reviews. Are solder balls a prevalent problem with this process? Most of them seem to correspond with pallet wall locations....is it too much turbulence from the rotary chip wav

  1 2 3 Next

wave and solder and pallet and shot searches for Companies, Equipment, Machines, Suppliers & Information

consignment program

High Throughput Reflow Oven
Sell Your Used SMT & Test Equipment

Repair tools for all your electronic circuit board repair needs.
Fluid Dispense Pump Integration

Outstanding liquid dispensing and UV curing, all within one platform, watch the video.