Electronics Forum | Wed Feb 28 00:01:47 EST 2007 | Muhammad Haris
Hi, The distance between the two terminations/endings/pads of 0603 (0201)is 0.15mm i.e. lesser than than the distance between the 0603 and through hole i.e. 0.5mm My ques is that, then why its termination doesnot short as it has a minimum distance.A
Electronics Forum | Thu May 24 15:47:10 EDT 2007 | mfgengr
Just to clarify: I'd say that it will potentially save money by turning the wave off at night, but the savings are minimal. But...If your power rates are cheaper during off peak hours (at night) like some power companies offer, it may save you money
Electronics Forum | Tue May 29 20:09:50 EDT 2007 | stepheniii
http://michaelbluejay.com/electricity/cooling.html this page has it right about minimizing AC energy use. With the wave, look at two machines. One you turn off, the other you let idle. The one that is turned off is using no power. The other one is
Electronics Forum | Thu May 24 14:03:09 EDT 2007 | grantp
Hi, I am ok either way, and the main reason I originally went with Soltec was the overall oven design seemed cleaner than ERSA. The soltec had good performance, but the oven design was neat internally, where the ERSA seemed to be a bit of a mess.
Electronics Forum | Tue Jul 10 11:49:20 EDT 2007 | samir
Parallelism tends to drift: �h After preventative maintenance �h From dross buildup or other obstruction clogging either wave Parallelism should at least be studied during the process characterization stage, so that you know your machine's process
Electronics Forum | Mon Sep 03 09:48:12 EDT 2007 | davef
Joris We don�t know the maximum period to store the boards without having problems with blowholes. Too many variables to determine. We prefer to just fix the problem, but understand that you have stock that you need to build-down. Determining mois
Electronics Forum | Wed Nov 07 12:29:41 EST 2007 | oswaldorey
Although greatly publicized and many papers on the subject, I wish to hear experiences from the field from professionals who have migrated from SnPb wave soldering to PbFree wave soldering. I am being pushed by one of my largest clients, an internati
Electronics Forum | Tue Jan 15 12:37:17 EST 2008 | gregoryyork
SORRY I did not offer a solution so here goes - The best way to get rid of this issue if you cant change flux is to reduce your flux consumption to a minimal with a spray flux and keep the heat REALLY high to boil off the alcohol before it can be abs
Electronics Forum | Tue Nov 25 11:35:11 EST 2008 | wavemasterlarry
Listen, I conqure with with wAyne on this one as your board house is always gonna the first person y a blame if you haven't adjusted any process paarameters in a while and see board related issues that can be traced to the board house. I once though
Electronics Forum | Fri Feb 22 14:22:07 EST 2008 | stevek
Are you using nocleans, especially when you get to SMT? Years ago, I had OA wave flux get into vias that were plugged from the top under parts. It is really difficult to clean small, high aspect ratio vias. Cross sections showed that the copper in