Electronics Forum: wetting and nozzles (Page 1 of 26)

Pick and Place drops nozzles

Electronics Forum | Wed Jul 20 22:46:41 EDT 2005 | nozzles

we can supply nozzle for varies machine brand,such as fuji,sanyo and so on. welcome to inquiry that!thanks vera http://www.hkenterprise.com/szcomfaje tel:86-755-28091605 ext.805 eskimy1001@gmail.com

Pick and Place drops nozzles

Electronics Forum | Tue Jul 05 09:25:25 EDT 2005 | smtuser1234

If the nozzle adapter is new then the nozzle are worn. How old are the nozzles ?

Pick and Place drops nozzles

Electronics Forum | Tue Jul 05 10:27:34 EDT 2005 | GEB

The nozzles are brand new too (got them friday). 08MPF (0.08") is their part number. I tried using the air kiss feature in the setup mode and found that it blew the nozzle off the nozzle holder, not sure if this is ment to happen in this mode, but t

Pick and Place drops nozzles

Electronics Forum | Thu Jul 07 07:27:10 EDT 2005 | buchi79

Are you buying nozzles from UIC or other vendor? By the way, what is the component you rejecting? Is it happening to random component or specific one?

Pick and Place drops nozzles

Electronics Forum | Wed Jul 27 12:50:59 EDT 2005 | mnguyen

You may want to look at which spindle that is dropping the nozzle and check the O-ring on the spindle head. It's probably bad, cracked, or broken. Replace it and that will fix it

Pick and Place drops nozzles

Electronics Forum | Tue Jul 05 16:29:27 EDT 2005 | stepheniii

The air kiss is to replace the vacuum with air so the part will drop off the nozzle. Every machine I've seen with Air kiss, uses it when discarding a part as well as when placing a part. The air kiss should not be strong enough to blow the nozzle off

Pick and Place drops nozzles

Electronics Forum | Mon Jul 04 11:32:44 EDT 2005 | geb

One of my Universal GSM (1995/ 1996 model) pick and place machines has recently started to drop the nozzle on the reject belt when dropping off a rejected component. I have tried replacing the nozzel holders on the ends of the spindles but with no im

The care and feeding of adhesive nozzles

Electronics Forum | Sun May 23 11:02:45 EDT 1999 | M Cox

Any suggestions on how to maintain Adhesive dispensing nozzles??? They seem to plug up over night and it is starting to get on my nerves. We have tried leaving the nozzles in the machine, removing them and soaking in alcohol, blowing them out with

Reg. Fuji nozzles at the H12HS and DX mounting heads

Electronics Forum | Thu Jan 20 08:26:22 EST 2022 | oclsc

Hej SMTnet. I have some questions regarding when to replace nozzles at the H12HS and DX mounting heads (Fuji Aimex 2, running Nexim). 1. Is there anyone here at this forum who has any experince how often it make sense to replace the nozzles in orde

Re: The care and feeding of adhesive nozzles

Electronics Forum | Mon May 24 13:06:12 EDT 1999 | Deon Nungaray

| | | Any suggestions on how to maintain Adhesive dispensing nozzles??? They seem to plug up over night and it is starting to get on my nerves. We have tried leaving the nozzles in the machine, removing them and soaking in alcohol, blowing them o

  1 2 3 4 5 6 7 8 9 10 Next

wetting and nozzles searches for Companies, Equipment, Machines, Suppliers & Information

SMT spare parts - Qinyi Electronics

Reflow Soldering 101 Training Course
Selective soldering solutions with Jade soldering machine

Wave Soldering 101 Training Course
Equipment Auction Automotive Electronics Supplier - Closure of Tier-One SMT Dvision: (10) ASM & Universal SMT Lines & Feeders Equipment as-new-as 2019! Dek | Koh Young | Speedline | Vitronics | Viscom

Training online, at your facility, or at one of our worldwide training centers"
Electronic Solutions R3

500+ original new CF081CR CN081CR FEEDER in stock