Electronics Forum | Mon Oct 06 18:24:34 EDT 2003 | pjc
what type of belt is it and what material is it? round belt, flat belt, etc... if its from a PCB transport conveyor or other PCB handling system, I recommend you contact the OEM. I have spliced belts before- rubber round belt off old Fuji loader and
Electronics Forum | Tue Oct 14 09:13:14 EDT 2003 | davef
To us, time above liquidous plus 20*C is more important than the 60 sec [er what ever] above 183*C [which we think is meaningless] that the fine solder paste supplier suggest. Based on what you've told us and lacking any failure analysis, we'd gue
Electronics Forum | Mon Nov 03 11:13:44 EST 2003 | ADAM
Guys When stripping conformal coating from an entire assembly, how do I know the stripping solution won't damage anything on the PCB ? stuff like electronic sensitive devices, wiring, labelling and plastic hinges. And secondly when conformally coati
Electronics Forum | Fri Nov 28 04:46:45 EST 2003 | gregoryyork
Best to establish what type of residue is causing this problem and then stamp it out.Speak with SCOPE Labs who offer PCB extraction followed by IR and IC work. So many problems with porous resist at present and NON ionic materials that you really nee
Electronics Forum | Tue Dec 02 08:16:21 EST 2003 | Daniel Werkhoven
Dear Adam, Yes, today certain companies are still using this cleaning technic to clean assembled PCB's. To be able to give you the right advise, I need to know what kind of fluxes are you using into your soldering processes and what level of cleanlin
Electronics Forum | Wed Dec 03 11:31:24 EST 2003 | russ
Does anybody out there know what type cable is used for the controller cable on an LSM large model circa 1996? Is it a standard 25 pin D-Sub? This is the cable that goes from the XY Axis line box to the controller. I have contacted Cyberoptics and t
Electronics Forum | Sat Dec 13 16:13:19 EST 2003 | adlsmt
After you get your prices, list the stuff here and get some performance, rather than price feedback on what you are looking to buy. Consider what you need to place and make sure the equipment matches it. If your doing 16mil T-Sops you wont be happy w
Electronics Forum | Fri Jan 02 14:04:56 EST 2004 | jjwhite
Has anyone had any experience with 60/40 Sn/Ni(300 u in.) over Ni(300 u in.)? If so, what kind of solder issues might exist with 63/37 Sn/Pb reflow? Is a different paste needed? Also, what is the benefit of using the same platings with a top plating
Electronics Forum | Mon Jan 05 18:03:04 EST 2004 | davef
You may struggle finding the information that you seek, because there is so much variability in the design and fabrication of boards. * What is the purpose of such a test? * What product type sees such an use environment? Consider using the guidelin
Electronics Forum | Thu Jan 08 13:47:13 EST 2004 | guest
It is my understanding that per IPC specs toe fillets are not required as they do not add any strength to a solder connection. Our thoughts were allways that proper toe fillets are a sign of a good process. What are some of your guidelines and though