Electronics Forum: white and residue and mask (Page 1 of 2)

Wave flux and profiling

Electronics Forum | Mon Dec 18 14:36:09 EST 2006 | samir

Yikes!! In-line cleaning, to clean cosmetic and benign residues (from a NO-CLEAN) flux... You sure you can't switch fluxes? Another variable with residues is the solder mask. Depending on mask type (glossy, matte, semi-gloss, or semi-matte), will

Wave flux and profiling

Electronics Forum | Mon Dec 18 23:24:50 EST 2006 | grantp

Hi, Yes, I would hate to resort to cleaning, but the product must be clean. We have been using palettes to keep most of the flux off the PCB, but there is still residue around the connectors. Does anyone suggest a good no clean flux to use with le

Wave flux and profiling

Electronics Forum | Mon Dec 18 13:00:47 EST 2006 | grantp

Hi, We have a white residue, which is visible, and we would like to have the produce clean as it's a PCI card, so users see the PCB. I am wondering if we need to install a cleaning stage to the line for these kinds of products. Can anyone give som

Flux Designations and Composition

Electronics Forum | Mon Jul 12 11:35:27 EDT 2004 | Pierre RICHARD

Here are some answers to my questions after a good research. I also added more definitions that could help understand this esoteric language used in assembly, specially surrounding fluxes and their use. In blue italics are comments and extracts from

Re: Ionic testing and No-Clean flux

Electronics Forum | Sat Feb 05 09:08:18 EST 2000 | Dave F

Casimir: Let me expand on something that I said in my response to your thread on ionic testing. Generally, no-clean people don�t use ROSE testing as part of their process control, because the ROSE test is essentially washing your board in DI/IPA �

Ecofree 303 conductive and corrosive?

Electronics Forum | Sun Aug 23 22:13:45 EDT 2009 | joannetjy

Hi All, Recently, I need to deal with a customer complaint that specify the PCBA white residue (flux residue from ecofree 303) may be the reason why the board intermittent. Anyone have such experience with this flux? Anyone can tell me is this flux

Ecofree 303 conductive and corrosive?

Electronics Forum | Mon Aug 24 04:46:54 EDT 2009 | joannetjy

Hi Radek, Thanks for your reply. I use this flux with manual soldering process for the product. Is this flux suitable for manual soldering? or it is only for wave soldering? I have sent the board for analysis, and the report shown that the white res

Ecofree 303 conductive and corrosive?

Electronics Forum | Mon Aug 24 03:59:26 EDT 2009 | hurr

Hallo Joanne, I had employed by producer of Ecofrec 303. We make many tests of corrosion and conductive test in our company. All results of this tests was OK . Vast majority correspond mil standarts. When I ask my labor assistent in BRY, white residu

Lead-Free Finish Boards and Components

Electronics Forum | Wed Jul 07 13:56:57 EDT 2004 | Pierre RICHARD

As converting our boards to lead-free finish (Immersion White Tin) we decided to change de mask color from green to blue. We thought this would be a good idea to spread the idea so we could easily recognize the type of solder application related to t

Problems with Vision and White Soldermask

Electronics Forum | Tue Aug 02 10:46:03 EDT 2016 | proceng1

We are getting more and more customers wanting LED boards built on White Solder Mask. Well our printers do not get as much contrast between the white mask and the plated fiducial pad, and often the camera only sees white. Other than playing with

  1 2 Next

white and residue and mask searches for Companies, Equipment, Machines, Suppliers & Information