Electronics Forum: wire (Page 56 of 130)

MELF's falling off

Electronics Forum | Wed Oct 18 08:00:53 EDT 2006 | davef

Have you tested the solderability of the inbound components per ANSI/J-STD-002, Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires?

SMT Storage

Electronics Forum | Thu Oct 26 07:06:37 EDT 2006 | paulinct

We store alot of our reels on portable wire shelves. We created a "floating island" between the computer station and the SM machines. Push them together when machines are running...wheel near a machine when loading a job.

quad 1000 error

Electronics Forum | Sat Dec 30 18:49:39 EST 2006 | A.S.

TRY TO REPROGRAM THE AXISES AND CHECK THE WIRES GOING TO THE E-STOP BUTTON THESE PROBLEMS CAN CUASE THESE ERROS TO KEEP COMING UP TRY THIS AND YOU MAY FIX YOUR PROBLEM

Marking on shrink tubing

Electronics Forum | Wed Jan 03 14:19:12 EST 2007 | muse

Have you checked out Alpha Wire Co. FIT-Print tubing? http://www.alphawire.com/pages/141.cfm I don't know if this is what you are looking for or not.

Hand Solder tips deterioration - No-Lead Pb

Electronics Forum | Tue Jan 02 08:11:21 EST 2007 | Rob

Try using a solder like S03X7C from Koki, which uses cobalt to prolong the tip life & also a wire wool type dry wipe instead of a wet sponge.

BTU VIP98 Oven refuses to start

Electronics Forum | Fri Dec 22 09:47:18 EST 2006 | realchunks

Check your battery back up if you have it. If I remember correctly, you may have to manually switch your wiring to by pass a dead battery back-up.

Where can i find Chip-on-board Forum?

Electronics Forum | Tue Jan 09 21:33:49 EST 2007 | davef

Setup Guy Thanks for the compliment. So, COB is not SMT. What is it? What kind of assembly areas do they use to print, place, reflow, and glob-top [or wire bond / encapsulate] COB? Any information you gave give to clairify this is appreciated.

Really need Omniflow 7 replacement cooling zone blower motor!!

Electronics Forum | Thu Dec 21 11:55:31 EST 2006 | realchunks

I have one form a year 2006. Uses the studds to keep track of revolutions. Four wires going to the motor.

Low Melt Solder Chemistry for use in Rework Process

Electronics Forum | Wed Feb 07 17:32:15 EST 2007 | davef

If you can't find bismuth wire, use 42Sn58Bi. For more, look here: http://www.mrs.org/s_mrs/bin.asp?CID=2274&DID=48689&DOC=FILE.PDF

SnPb reworked with SnPbAg ?

Electronics Forum | Tue Mar 20 06:09:20 EDT 2007 | d0min0

Hi, can't find answer to my question on web - maybe someone can help would it be compatible to use a wire of Sn62Pb36Ag2 for a product made with Sn63Pb37 paste ??? regards


wire searches for Companies, Equipment, Machines, Suppliers & Information