Used SMT Equipment | Wire Strippers
We have an immediate need for Autosplice SAS splice machines. If you have one, or multiple; please contact me asap. Thanks ashlin@bajabid.com 813-992-2437
Used SMT Equipment | THT Equipment
Universal Jumper wire er. Come from production, good condition Model:6683C
Used SMT Equipment | THT Equipment
Cycle Rate Max 25,000 cph (0.14 sec. per insertion) Reliability 200 ppm or better Component Types Capacitors, resistors, diodes, jumper wire, etc. Component Specs Component Class I Distance Between Tapes 52.4mm +/- 1.5mm (2.063” +/- 0.059”) Pit
Used SMT Equipment | Conveyors
Operating Voltage 120VAC/60HZ Enclosure Type 1 Largest Motor HP 1/25 Maximum Ampere 0.92 Short Circuit Current 5 kA RMS 120V Max Wiring Rev ISCRNOTB.1 ID 38798
Used SMT Equipment | Conveyors
Operating Voltage 120VAC/60HZ Enclosure Type 1 Largest Motor HP 1/25 Maximum Ampere 0.92 Short Circuit Current 5 kA RMS 120V Max Wiring Rev ISCRNOTB.1 ID 38795
Used SMT Equipment | Conveyors
Operating Voltage 120VAC/60HZ Enclosure Type 1 Largest Motor HP 1/25 Maximum Ampere 0.92 Short Circuit Current 5 kA RMS 120V Max Wiring Rev ISCRNOTB.1 ID 38796
Used SMT Equipment | Pick and Place/Feeders
Details: • Magazine loader setup for TDK magazines, 4 come with machine • Bare board loader • Wire jumper inserter module in machine • 120 inputs Condition: “As is , where is” Machine still online and available for Inspection Location & Shippi
Used SMT Equipment | Soldering - Selective
• Dual Pot Lead/Leadfree • Drop Jet Fluxed • Inerted Nitrogen System • One AP Solder tips • PillarCOMM Windows Software • Solder Wire Feeder • Solder Bath Level Sensor • Solder Wave Height Measurement • Black and White Camera Programming • S
Used SMT Equipment | Soldering - Selective
• Process Three Boards At Once “Fluxer, Preheat, Solder Pot” • Jet Fluxer • Bottom Side Preheat, 1 Zone • Dual Pot Lead/Leadfree • Inline • Nitrogen • SMEMA Ready • Wire Solder • 4 X 400V Condition: Complete & Operational “still online” Lo
Used SMT Equipment | Soldering - Selective
Options: • Less than 100 hours of operation • Top side pre-heat • DC servo drives • Integral PC and machine mounted TFT monitor • Inerted Nitrogen system • Auto motorized wire solder feed & level detect • Solder bath coding – ide
