Electronics Forum | Thu Feb 04 12:23:06 EST 2010 | raranchado
We have a CS400E that I'd like to connect to a PC with xp OS using serial port. What needs to be done to make this work?
Electronics Forum | Thu Feb 11 15:11:57 EST 2010 | hegemon
Speaking from experience, my vote goes to Mirtec MV-3 or MV-7 with the 4 Megapixel camera setup. 2 Megapixel cams won't inspect that small, other than for presence Yestech also has machines that are suitable for this work. No company affiliations,
Electronics Forum | Mon Feb 08 23:44:31 EST 2010 | glennster
Woody, Daisy chain packages are definitely needed, but if you can get packages with a dummy chip inside these will provide a more accurate simulation of working components. If possible, continuous monitoring of resistance during the test will be
Electronics Forum | Thu Feb 11 09:14:05 EST 2010 | blnorman
One other thing, if you're using this for vibration dampening, would a silicone work? Much lower modulus.
Electronics Forum | Fri Feb 12 02:49:12 EST 2010 | smellew
CC if this works good, MCS & F4G cables are different also different to the Host cable i gave you before. do you have setup manuals? regards llew
Electronics Forum | Fri Feb 19 06:45:58 EST 2010 | kenadams
Why was it down before? It's possible you have bad cabling. Voltage will read okay but it/they will require very little resistance to work properly (like less than 1.5 ohms).
Electronics Forum | Tue Mar 02 04:30:32 EST 2010 | sigmaprint
Hi. It sounds like you may have the problem under control as you have ordered parts but if it still doesn't work please don't hesitate to contact us at sales@accuspares.com or visit our website http://www.accuspares.com. We should be able to help....
Electronics Forum | Mon Mar 15 18:03:21 EDT 2010 | smt_guy
hi, check the home sensors if they are working specially on the right side rail of the camera where you had the failure.
Electronics Forum | Sat Mar 13 10:42:45 EST 2010 | davef
Manuel: What is the objective of OEE? It seems to say it's OK to give-up 4% of your quality, if you can increase your machine speed by 5%. Does it work on machines that are not capacity constrained?
Electronics Forum | Mon Mar 01 09:17:56 EST 2010 | duso02
Hey....I think it might be the silicone adhesive! LOL Yeah, that'll do it. We use simple Shercon paper dots. Work like a charm. No evidence of "de-wetting".
