Electronics Forum | Sat Dec 20 10:22:51 EST 2003 | valuems
Hello, You may not like my idea but here goes. Take the operators in a room and tell them to look at each other. Then tell them that If the solder paste isn't put where it belongs and not placed where it dosen't belong, that some of you won't be in
Electronics Forum | Tue May 18 09:49:40 EDT 2004 | Rob
Seems we both have something in common. My company used to issue each person a toolbox with solder pumps, cutters, pliers and the good stuff. But we can never keep them in the boxes. They tend to walk away after a few uses. There's nothing you can do
Electronics Forum | Fri Nov 19 18:02:03 EST 2004 | valuems
If it is a MPM printer you can install the environmental control unit. But it isn't as simple as most people thinks. You also have to install a thermostat inside the machine. Then there is a wire that is used to turn it on and off, this wire is fr
Electronics Forum | Tue Apr 05 15:31:15 EDT 2005 | Carmine Garboza
A dermatologist should be consulted. Contact allergies are tricky things and you can develop one from repeted exposure to almost anything. I've seen rashes breakout on my personell from wriststraps metal buckels, IC lotions, rubber gloves, finger cot
Electronics Forum | Tue Jun 21 19:27:21 EDT 2005 | zl3vlf
Hello all! I'm looking for examples of part data for BGAs created in the MCS-16 environment (V3.20). I've heard using vision number 1, and vision type 10 works, but comes up with a transmission error. As these vision numbers are for chip components,
Electronics Forum | Fri Sep 16 09:14:29 EDT 2005 | actech
We have just launched a new contract assembly house and I was wondering if there was anybody out there that had an honist formula for calculating labor cost for the purpose of bidding assembly work, "is there a good canned software package that actua
Electronics Forum | Wed Sep 21 04:50:10 EDT 2005 | Slaine
i set this up for one of nokias manufacturing plants and based it on the value of the board, caluclated the average rework times, worked out the costs of rework and costs of the board then for each type manufactured put a figure on the number of time
Electronics Forum | Tue Jan 03 14:55:56 EST 2006 | DannyJ
Caveat... I do not work for either company nor am I endorsed for this recommendation... We use CircuitCam for our needs. Works pretty well and allows you to keep several databases and is modular. Very pricey. The other software I have heard of is
Electronics Forum | Fri Jan 13 13:43:51 EST 2006 | russ
As far as I have determined, the Gel and Tacky are the same animal. Just flux works well, I did forget to mention that this flux only method will not work with a CCGA (Ceramic Column Grid Array) since these columns are not meant to be reflowed.
Electronics Forum | Thu Jun 08 19:51:22 EDT 2006 | grantp
Hi, That's good news, and we did outs with SN100C as well on Wed, however we are still working hard on getting a good profile. We have some large BNC connectors, and they are hard to profile. We also have wave palettes, and these might be too thick