Electronics Forum | Fri Dec 14 14:00:08 EST 2007 | dphilbrick
I have had the Amistar LP1000 for about 5 years and LOVE it. A little trouble between the Zebra printer and machine but since I bought it used no pay no upgrades and I understand new software might improve that. Otherwise it always works. Probably pu
Electronics Forum | Wed Aug 27 12:57:25 EDT 2008 | adamcrum
I have had this problem with my Vitronics wave and looked into alternatives. Kyzen has a product called Cybersolv 8502 that is made specifically for finger cleaning. I found it to work great. They will send a free sample to you of a pint, but I would
Electronics Forum | Mon Jan 14 12:35:28 EST 2008 | dphilbrick
Jay Go to the Services menu and then station configuration. Choose your F3 machine from the list. This will open the tool that allows you to configure what the machine has on it. Look to see if you have a box with the following: WPC-TR S_WPW_80F
Electronics Forum | Thu Jan 10 09:23:20 EST 2008 | jdumont
Looking for some opinions on what the best, readily available, Alpha lead free water sol paste is out there. Only thing I can see on their website is the WS-819. Anyone with experience with this? We currently are using the OM-338 NC which works great
Electronics Forum | Mon Jan 14 18:19:35 EST 2008 | geb
Thanks for the info. I use the machine with a 1mil for resistors and capacitors and the machine with the 2.6mil for ICs (both have a 4mil.) This is because the r's & c's seem to benefit from the 1mil, more than IC's. I was thinking of making the mach
Electronics Forum | Thu Jan 17 09:55:44 EST 2008 | cyber_wolf
Bill is no longer with SMT Research. The camera cal/replacement on CP6 is better off left to the pros.Unless your techs are VERY familiar with the procedure. Call Greg Frazier @ 704-995-4591 he is with SMT Resource. Greg has done work for us in the
Electronics Forum | Mon Jan 21 18:11:35 EST 2008 | dyoungquist
0.031" radius is a diameter of 0.062" which is very tight (small) for a rounded corner. I would tend to agree with the board house that is can not be done. 0.031" is a standard thickness of PCB. I think it is very possible that your customer swapp
Electronics Forum | Sun Feb 03 08:30:39 EST 2008 | davef
We dislike having to use the horizontal scroll bar [er whatever it's called] also. Large images in a posting cause the box used to reply to that posting to be shifted to the right is an nother peculiarity that could be improved. [Probably, this isn't
Electronics Forum | Thu Jan 24 13:43:20 EST 2008 | operator
I am a SMT Process Engineer and I make $18.85/hour. I think that is low considering I just turned down a job in Houston that was offering me over 50K for the same position with less reponsibilities. It just comes down to what company you work for and
Electronics Forum | Mon Jan 28 10:12:05 EST 2008 | dyoungquist
I am the manufacturing engineer for a small electronic OEM who also provides EMS for other local electronics companies. We are located in Montana (USA). In 2007 I made 36K. While that seems low, remember that my commute to work is only 10-15 min a