Electronics Forum | Fri Sep 25 13:09:42 EDT 2009 | rmitchell
Thanks to those that responded. I eliminated the light curtain problem. The metal plate the light curtain pcb bolts to was bent. I had it aligned in our machine shop and it worked properly. I forgot to mention the error was pooping up with no fee
Electronics Forum | Fri Sep 25 14:58:33 EDT 2009 | gantry228
It is apparently a Q-series machine, if the adjustment for pitch and roll doesn't work. You may have to loosen or remove the quadalign then check the "wavey" washers to ensure they are there and opposing each other (these provide like a spring effect
Electronics Forum | Wed Nov 25 14:37:13 EST 2009 | ccouture
We use a FREE maintenance management software called Maintenance Assistant http://www.maintenanceassistant.com/ Take a look, we have over 50 machines and all the expendable parts are in the database. scheduled maintenance, work orders etc... pretty
Electronics Forum | Wed Oct 21 09:58:45 EDT 2009 | fönsi
Ok,I agree, you're right. I also noticed at the last few days, there is no standart format for it. What I'm searching is a programm, that can convert different files (for example a paf-file) into a textfile with Ref, Xpos, Ypos, deg and top/bottom. F
Electronics Forum | Thu Oct 15 14:43:58 EDT 2009 | dilogic
I assume your global fiducials are on the panel, but outside circuit area. If you circuits are not placed exactly as in the program, globals would be located, but locals won't. At least, older UPS versions work like that. - Deni P.S. By the way, as
Electronics Forum | Thu Nov 05 10:02:54 EST 2009 | swag
You can buy a couple of conveyors for loading and unloading machine or a real half aced way is to jump SMEMA cable pins with tweezers to get boards in and out. With that method, you could end up with one on the floor at some point with a smashed, de
Electronics Forum | Mon Nov 16 11:08:41 EST 2009 | jamike
Firstly if you buy a used machine you may be inheriting someone else's headache, the reason its being sold is probably because it's old, worn or unreliable. We have had a JUKI KE 2060 from new, it has been worked hard everyday for several years with
Electronics Forum | Fri Oct 30 12:48:59 EDT 2009 | dannou
I've been the AOI programmer for around 5 years now. The equipment I use is the Orbotech VT-9300 & VT-9500 systems. The programming isn't too difficult, mostly Grey-scale shadow measurement through application algorithms. Three levels of lighting an
Electronics Forum | Sat Nov 07 14:05:43 EST 2009 | doremi
Hi, I have 4 years as an AOI Process Engineer and we are working with 3 types of AOI - Marantz 22X, VI3000 and Omron (RNS & VT-WIN2). For solder joint inspection (solder meniscus quality, insufficient solder, wetting problems, shorts (bridges) Omron
Electronics Forum | Sun Nov 01 21:01:26 EST 2009 | isd_jwendell
I'm at 6800 ft. The only issue I had was related to a PEM nut that was not packaged properly. There was a piece of K@pton tape that was not centered on the part and the tape would stick to the carrier. The vacuum on my machine would not allow me to
.gif)
