Electronics Forum | Wed Feb 13 09:26:45 EST 2013 | slthomas
All good comments from everyone and all things we're either working on now or know we should but can't because our resources are already stretched too thin. Frankly I hate CAPAs because I hate getting them. Maybe I'd learn to love them if I initiate
Electronics Forum | Thu Feb 14 13:10:58 EST 2013 | markhoch
I had this problem once a loooooooong time ago with a 248 that was at my previous place of employment. If I remember correctly, my issue was caused by a set screw on the drive gear that had worked itself loose. My issue was stright forward and quickl
Electronics Forum | Thu Feb 14 17:00:42 EST 2013 | richardc
I am trying to use Mydata TM8C feeders that work fine on a TP93 running 1.6.18 TPsys but are not recognized by a TP94 machine running 1.4.7 TPsys. I get a green flashing light instead of a solid green. I can initialize the hardware but can not proc
Electronics Forum | Thu Feb 21 11:22:06 EST 2013 | emeto
It is a very interesting thought. However, teach all positions on the PCB might be challenging if you don't have them in the file. I think it is a smart think for OEMs as they would have all the resources to control their files. For CEM I don't see i
Electronics Forum | Mon Mar 18 09:19:48 EDT 2013 | marcelorotofrance
I can move the axes XYUV just in short steps through the "MANUAL NC" function. The axis encoders seem to work; the readings of position follow the axis movements. However the actual position of the head has nothing to do with the readings at the disp
Electronics Forum | Fri Mar 15 16:26:04 EDT 2013 | hegemon
Mask the pad on the PWB using liquid solder mask. Cure the mask and away you go. Use a mini stencil and a squeegee to maintain planarity and minimize issues at paste print. We have used this technique before. In other cases we have masked the bott
Electronics Forum | Fri Mar 15 18:44:34 EDT 2013 | anvil1021
We will try both the solder mask and the .001" Kapton and see where we end up with each. This is a fine pitch dual row QFN and we cannot afford too much paste on the .004" stencil we are using. We have experienced shorting in the past with .005" sten
Electronics Forum | Mon Mar 25 19:44:32 EDT 2013 | hegemon
IIRC - After completing the reflow, you'll need a soak in DI water for a few minutes (be patient), then peel with a tweezer, and finally use a soft brush to remove the extra bits. At least it used to work that way with the Winslow/Solderquik product.
Electronics Forum | Thu Apr 11 11:06:27 EDT 2013 | ericrr
1) I think maybe not, however having said that, our conveyor does not work between the final placement machine and the oven, in the early days before I became a "experienced" operator in pulling the board out of machine running it along the track to
Electronics Forum | Mon Apr 01 19:50:22 EDT 2013 | jorge_quijano
Hi to everyone, I have a bad situation here, I'm getting a wave solder back to life and I realized that my automatic fluxer is no longer working (some parts seems to dissapear), I already look for a new one, but I will get approval untill year end, s
