Electronics Forum | Mon May 16 07:59:50 EDT 2005 | johnw
ok guys here we go I am looking for production simulation software I am presently working on a project to enhance my Fuji smt lines production yeilds and throughput can any of you guys suggest what factors need to be taken into consideration and is
Electronics Forum | Mon Jun 06 16:09:03 EDT 2005 | avalancher
Grant, As a MYDATA user, your comments worry me. You state that the MDYATA's are not stable or reliable? I am currently placing 0201's with the HYDRA head (at appx 15K/hr) with 0.01% fallout/bad placement. I also place a large range of fine p
Electronics Forum | Wed May 25 09:29:26 EDT 2005 | PW
In a time crunch, kapton tape works great. If you are using durostone or some material like that for carriers, make sure it is clean right after you machine it and the kapton will stick very well. We are low volume so we pretty much always use tape
Electronics Forum | Thu May 26 08:44:37 EDT 2005 | stepheniii
And would it be worth ressurecting anything from before the boom-bust a few years ago? There were a lot of cancelled orders for new machines and the market dropped out of the used equipment market. I'm sure most of the cancelled order machines are
Electronics Forum | Wed May 25 23:08:29 EDT 2005 | eb
Hello, I'm considering purchasing circuit cam at the facility I work at. I'm pretty familiar with circuit cam from a previous job and was wondering if anybody knows of any other similar types of software that can perform the same types of operations
Electronics Forum | Fri May 27 10:34:05 EDT 2005 | Rob
Hi Joris, I've used 10's of Millions of these (and the AVX version - PBRC****) and never found this problem (I also worked for Murata back in the mists of time & never encountered it). Internally the part is thermally symmetrical, so the only thing
Electronics Forum | Mon Jun 13 13:35:36 EDT 2005 | cambriadj
This thread proved useful. We are considering our own SMT line, and yes, its the Topaz vs Mydata discussion. From our work, the Phillips support seems better, but this is a region by region issue. The accuracy and placement rates are both good for wh
Electronics Forum | Wed Jun 01 07:34:19 EDT 2005 | davef
It's unusual to use a horseshoe shaped pad for a 0805. Commonly when people want to reduce the paste volume to reduce solder balling, they print a "home plate" aperature. We print paste 1:1 with the pad. �IPC-7351 LP Wizard� is the library mainten
Electronics Forum | Fri Jun 03 15:30:06 EDT 2005 | nealh
We are currently using CirciutCAM for our documentation and run a Fuji line with a CP643 and an IP2. We are using FujiCam to program. I wouldlike to replace the IP2 with a Mydata My9 and here are my questions. Who out there is using CIrcuitCAM to pr
Electronics Forum | Mon Jun 06 10:14:05 EDT 2005 | stepheniii
The biggest most important overall factor I have seen is the personel running and looking after the equipment. Any plan not involving them will probably not be effective. The front line people can probably tell you more than you can tell them. I hav