Electronics Forum | Thu Sep 22 18:15:51 EDT 2005 | PWH
Does anyone have experience using a shuttle on a GSM platform? I'm just wondering how well it works and how reliable and trouble free the component picks are. I am looking to run a low volume line with a printer/oven and a GSM1 platform with a PTF
Electronics Forum | Mon Oct 03 21:15:16 EDT 2005 | adlsmt
Its a single board, one up. 4 layer, pretty simple, no large copper pours. We get these consigned from our customer so I cant work that end of it but wanted to make sure to cover everything I can. The oven it runs in was just checked out by the facto
Electronics Forum | Mon Oct 03 09:31:31 EDT 2005 | Rob
There's also microflame which uses a mini gas flame to melt the solder. We tried a number of ways then modified some conveyorised robot cells we bought at auction, using wire feed & an iron head, incorporating veriable tinning & preheat, with point
Electronics Forum | Sun Oct 09 08:28:04 EDT 2005 | davef
First, no one knows very much about the relaibility of Pb-free assemblies, much less Pb-free solder with Pb-bearing components. Second, we do know that Pb-free components work with PB-bearing solder. Third, based on comparison laboratory testing,
Electronics Forum | Tue Oct 11 15:21:12 EDT 2005 | Hoss
Sean, If the machines use more than the spec'd 8CFM, are not leaking and work fine otherwise, I wouldn't disqualify them on that basis alone. You may be exceeding the duty cycle rating of your compressor and not necessarily the volume. If Samsung
Electronics Forum | Tue Oct 11 14:42:15 EDT 2005 | patrickbruneel
NASA website on Tin whiskers: http://nepp.nasa.gov/whisker/ NEMI Tin whisker activities: http://www.inemi.org/cms/projects/ese/tin_whisker_activities.html CALCE Tin Whisker Working Group: http://www.calce.umd.edu/lead-free/tin-whiskers/ Measur
Electronics Forum | Thu Oct 20 23:19:09 EDT 2005 | Cmiller
You should not be worried about these points in the SMEMA standard. You need to make it work for your application. If you are running really small boards, keep the gap between conveyors and the lead-in as tight as you can. If you are using large pane
Electronics Forum | Fri Nov 04 20:25:47 EST 2005 | mika
Always happy to share information. Perhaps other viewers on this thread, can get some ideas of "how to". /Sincerely Ps. There is a so called "standard height" which the conveours/machines from different manufactories must be able to reach; without r
Electronics Forum | Fri Oct 21 12:19:36 EDT 2005 | ratsalad
I can see this being useful to a company that needs the ability to do one-day turns on prototypes. The type of situation where your customer shows up at your door with two bags, one is a bag of parts and the other is a bag of cash and they say they
Electronics Forum | Wed Dec 07 12:56:27 EST 2005 | bobpan
If you are referring to having the control knob on the head for the lighting or controlling it through the software... then...version 6.0 works for both. Make sure you go into scp.ini and turn on\off light control. For 0402 parts......you must have