Electronics Forum | Thu Oct 14 02:47:37 EDT 2010 | costache
hi i dont know this 2 systems, i work with %DX frm Agilent , Tiger from FeinFocus and XD7800 from Dage and this one is realy big. Viscom and the other one i dont know for haw long the time are in this AXI area...and if u need to do only sample test
Electronics Forum | Wed Oct 20 19:02:30 EDT 2010 | swag
We've done many fine pitch parts using only global board fids with good results. However, if you're working with flex or flex/rigid designs, I would never use global or panel fids for fome pitch placement. We always request addition of local fids u
Electronics Forum | Thu Oct 28 08:28:33 EDT 2010 | d0min0
Hi, previous topics found closed so I couldn't continue on them, but wanted to ask maybe something that we don't already know paste shape and placement ok, reflow 12 zones profile looks ok (same since 2 yrs), component placement ok, one reference i
Electronics Forum | Mon Nov 01 16:22:47 EDT 2010 | jax
Who Cares... Mix Away! Although you should not mix different Solder Pastes' together in a container or on a stencil (Mostly due to the flux, although solder sphere size and shape could cause an issue), mixing solder brands or chemistries on a board
Electronics Forum | Tue Nov 02 10:31:22 EDT 2010 | tagge
Hi, we have run in to a tenryu SMT mounter and cant get it going.. When trying to create a program it refuses to set the PCB. The conveyer isnt starting when using PCB SET. Anyone out there who has used these machines? what am I doing wrong? The mach
Electronics Forum | Fri Nov 05 10:35:18 EDT 2010 | methos1979
This was a great post from another thread here with some tips: Date: November 04, 2010 07:42 PM Author: eadthem Subject: Who has best desktop AOI ? We do almost exclusively SMT parts but for solder with a 45 degree fillet angle use vertical light
Electronics Forum | Mon Dec 27 07:12:54 EST 2010 | clampron
Good Morning Methos 1979, I have worked with the Mirtec MV2 and 3 for several years. I did perform some evaluation of the red/blue filters. We found it to be usefull for some specialty solder inspections but we found it most usefull for solder inspe
Electronics Forum | Fri Dec 03 12:16:58 EST 2010 | vmorina
Hi Jack, I haven't progressed that much on the reflow project.I'll be working on it in two weeks. Although, I have few vendors that I've been communicating for more info about vapor phase reflow ovens. See the following list: Wenesco Sintronex AICT
Electronics Forum | Fri Nov 19 21:40:02 EST 2010 | rodrigo
D8->D7) and D18 (D18->D19->D18). Well... it looks like D18 had an issue so it went to D19 but when it finished the D19 reel it went to D7!. I endeed up with D7 parts in place of D18. These are both 0805 resistors. Has anyone seen this ? Did I mis
Electronics Forum | Tue Nov 23 00:20:10 EST 2010 | jamez
In flexa,the"Part Comment" field used for special instruct for kind of parts,it will be showed in the Report so that oprators can calrify know what to do.... i havent used MCS30&F4G,but i know machine can worked like your way well in flexa..... And i