Electronics Forum | Wed Sep 27 23:34:08 EDT 2017 | heros_electronics
Why don't you look > here: https://support.dialog-semiconductor.com/fo > rums/post/dialog-smartbond-bluetooth-low-energy-%E > 2%80%93-software/bluetooth-programing Hi Deni, thanks for your help. Can you recommend any firmware burner for DA14586?
Electronics Forum | Fri Dec 01 12:56:33 EST 2017 | emeto
It seems that it will work with 5 mil stencil. To be safe use 4 mil if the rest of the design allows it. 10x20mil apertures for both rows. If you have bigger footprint in the corners, make bigger apertures there. For the ground plane, I would use ver
Electronics Forum | Sun Nov 19 23:03:22 EST 2017 | macrorie
Hello, New user here, so I apologize for treading on toes and/or showing a lack of knowledge. My question is this: Is there any where that has collected the parts definitions for newer parts that one could use in AutoProgram? It would seem to me
Electronics Forum | Tue Dec 19 12:38:37 EST 2017 | tsvetan
Autotronik/Borison is the only Chinese machine which actually works well, perhaps because it's designed in Germany, all other I've seen and evaluated are totally amateurish attempts with zero reliability, could be classified just as toys with no seri
Electronics Forum | Tue Dec 19 16:30:23 EST 2017 | charliedci
We have several selective soldering machines, that because of several minutes of process time per PCB, one operator can keep 2 or sometimes 3 machines loaded and running. Other days only 1 machine is running but operator does not have enough time to
Electronics Forum | Wed Dec 20 10:44:31 EST 2017 | bobpan
The z-rod bellows on head 2 and head 3 are slightly bent. The machine will show you this error if the runout is over 6.5 mils. This is usually caused by too much z when picking parts out of a vib or tray feeder. The machine will probably run. I ha
Electronics Forum | Fri Jan 12 03:52:06 EST 2018 | kimseo
Hello dear, we have own SAMSUNG CP40CV pick and place machine. Today I had to change a battery in PC mainboard. It didn't work immediately. I had to open BIOS and load DEFAULT SETTINGS. Now I can start a computer but after Windows is started it will
Electronics Forum | Fri Apr 13 02:35:42 EDT 2018 | kimseo
PROBLEM SOLVED I bought a diagnostic PC card (ISA/PCI) for checking the PC of the machine... Firstly I tried ISA slot - nothing happend.. the diagnostic card didn't work... so I tried to put it into PCI slot but.... what happend ? The machine starte
Electronics Forum | Wed Jan 17 02:52:55 EST 2018 | robl
Hi Mark, we use BOM Connector from Router Solutions. It took a while so set up, but works well in linking our part numbers to customer part numbers, and looking up part numbers on new BOMs. We also import the BOM Connector BOMs into our ERP, but th
Electronics Forum | Wed Jan 17 05:58:45 EST 2018 | awelektronik
Hi Evtimov, no, i have no possibilities to change the Light. My Camera knows only on and off. The PCB-Solder resist looks in that IR-Light whyte like the CE-Symbol of the picture i post in my first message. The Pins with gold looks the same. Its an