Electronics Forum | Fri Apr 01 01:26:17 EST 2005 | Marv
A couple of things.. 1) The problem is more than likely on the magazine board itself (TC2), most likely the pal chip that stores the serial number and feeder information (you could swap this with a working magazine to verify) 2) The magazine connecto
Electronics Forum | Thu Mar 10 23:23:56 EST 2005 | pmd
We have a MyData TP-9-2 with a in line Y wagon. It is a long screw and the vintage is 1994. The Y wagon vibrates at about 24 micrometers at about 25 hertz. Burnin reviels zero encoder pulse errors. Hystersis test indicates a Y axis Y wise varance of
Electronics Forum | Mon Mar 21 02:51:23 EST 2005 | amstech
I have done few thermocouples using high lead solder, silver epoxy that is used for die attach purposes and some X - non conductive material. Though all materials show a slight variation in temperatures (3 to 5 degree C), the dwell time at peak is qu
Electronics Forum | Tue Mar 22 12:11:15 EST 2005 | jdengler
Bob, I don't have 300 stencils only about 83 so my way might not be practical for you. This is what I have done. 1. I have racks that hold 20 stencils, 10 top 10 bottom. 2. Number the racks and have them in order. 3. Made a number system for locati
Electronics Forum | Thu Mar 24 22:39:22 EST 2005 | pmd
My opertaors have lots of setup problems with vib feeders. They dont realize that the chip weight pushes parts down and when feeders run low it's the frequency that drives the parts. Mixing parts with diferant phisical deminsions and masses in the sa
Electronics Forum | Tue Apr 05 09:27:49 EDT 2005 | russ
These sound like european machines, From what I can tell so far Lead Free capable ovens just mean that they have hotter heating elements, and blower fans that can take the additional heat supposedly. It does not appear to have anything to do with t
Electronics Forum | Fri Apr 15 08:23:14 EDT 2005 | cyber_wolf
We are seeing more and more jobs come in with matrix tray parts for our mydata machines. The problem is that the largest Y wagon will only hold 3 or less trays. We have some jobs that have 10+ trays. Currently our operators cut the trays down to sma
Electronics Forum | Thu Apr 28 08:04:45 EDT 2005 | stepheniii
I like Mydata, Fuji, and Panasonic equipment. However if you have one, I"m not a fan of mixing. I have worked with the IP3 with MTU. I found it a good solid machine. The only thing at that time was the programing. I believe they have changed thi
Electronics Forum | Mon Apr 18 12:28:33 EDT 2005 | davef
We've never heard of it either. Stained glass widow people use varous types of copper and brass tape / foil in their work. A widely used suppler of this tape is Venture [ http://www.venturetape.com ]. They may be able to help. We're not sure how
Electronics Forum | Thu Apr 21 11:43:03 EDT 2005 | davef
We understand the problem of trying to coat over RTV. We have seen the same problem with acrylic and urethane coatings not wanting to stick to RTV. Some acrylics seem to be worse than urethane. Since this is a new product, may be you could pot your