Electronics Forum | Mon Oct 10 15:24:15 EDT 2005 | zl3vlf
Hello to all! Our Fuji FIP-3 placement machine has come up with a servo alarm (X2-axis) whenever we try to run the machine. The manuals don't go into a lot of detail as to the cause of this problem, but there is plenty of information on what the X2
Electronics Forum | Fri Oct 14 03:50:08 EDT 2005 | steve
Alot of folks are going to experience this with their poorly designed desoldering systems. I would check the temperature that is being delivered at the tip of the desolder gun. A small preheater is recommended. The other problem you will encounter is
Electronics Forum | Mon Oct 17 11:01:08 EDT 2005 | ???
Since you asked......lots of binding problems....lots of heater over temp problems (which are easily wired out of the machine). Been to lots of places and almost never saw a heller oven down or being worked on (and seen lots of hellers). Like i said
Electronics Forum | Tue Oct 18 04:44:44 EDT 2005 | dougs
these are two separate things, your MSA is measurement systems analysis, moving a machine won't change the way you measure your machines performance so you don't need to do MSA again. you should check machine capability once a machine is moved thoug
Electronics Forum | Tue Oct 18 06:55:48 EDT 2005 | jaks
I have written software that will log inspection results from the Agilent SJ series AOI machines. It is a standalone package including graphical repair station software. There are 3 output formats. Two text formats and a direct access database write.
Electronics Forum | Fri Oct 21 09:13:50 EDT 2005 | rlackey
Hi AJ, Depends on what machines you are running, how you run them, and if you have the spare components on feeders lined up ready to go. On a volume job using CP's using both feeder banks on change over I'd be upset if they stopped for more than a
Electronics Forum | Wed Jul 19 20:28:49 EDT 2006 | mrduckmann2000
We recently purchased a Mirtec AOI machine, it take a bit to program but overall we are pleased. The machine has a downward looking camera, we have had some issues with the machine not catching opens. When a IC has it's legs bent straight up off th
Electronics Forum | Thu Oct 27 05:51:17 EDT 2005 | pavel_murtishev
Good day, Search the net with "Solder paste softener", or check the links below: *Malcom http://www.malcomtech.com/products_sps.html *Japan UNIX http://www.japanunix.co.jp/ju_en/products/UM-103.html *Genitec http://www.genitec.com.tw/gam-60-e.htm
Electronics Forum | Fri Oct 28 12:09:31 EDT 2005 | Cmiller
Your vibe feeders will probably work fine. Using the old tape feeders on a Lighning head will limit the speed of the machine big time. I have not done it but I dont think its a good idea. We considered buying used feeders to offset the cost of our ne
Electronics Forum | Wed Nov 02 11:27:45 EST 2005 | rlackey
Depends on the actual requirements of the machine & the skill of the operator, but for that sort of money I've seen Juki 570's with a stack of feeders, Versatronics RV4's, older Mydata's, Samsung CP30's, Essemtec, Philips CSM's etc. I even once bough