Electronics Forum | Mon Apr 05 09:33:42 EDT 2010 | flanz
Hello. I'm new to the group and would like to ask a question about a YTV-2000 that I have. Question is - Could someone explain why my Yestech 2000 has a hardtime with calibration? What happens is that I run calibration before I start a new board.
Electronics Forum | Wed Apr 21 17:50:04 EDT 2010 | joeherz
Does it have to be one for both 1D and 2D? We > scan barcodes we print with a 200 DPI printer > which works out to 5 mil wide lines with no > problem. 2D barcodes need a completely different > kind of scanner. > > I know there are scanners > th
Electronics Forum | Sun Apr 25 21:01:57 EDT 2010 | m79d
Hi all our IP1(1993)is not reading the board fiducials, the light comes on at the fid camera and stay on and the machine just hangs. Need to press the emergency stop button to go any further and screen says 'mark not readable'. None of the bulbs h
Electronics Forum | Tue Apr 27 16:42:18 EDT 2010 | m79d
Hi jepoy + a very frazzled man thanks for your suggestions,here is how it went:- I found a couple of these VM1710 boards and tried one and still nothing. I really wanted to see if power was getting to the camera and anything coming out. I was loo
Electronics Forum | Thu Apr 29 09:18:54 EDT 2010 | rgduval
If you go with a Quad from PPM, I believe that they've developed a windows interface for the machine. They also have a couple of old Quad people working there for continued support. --I receive no benedits from PPM, but I am a happy customer-- We
Electronics Forum | Tue May 04 11:30:19 EDT 2010 | tsventek
I just had the same issue, it was a corrupt fiducial file in the program that kept on loading when booted. If your vision card is working follow these steps: Reboot the machine, press F5 when the computer beeps to enter DOS, delete the file maninf.d
Electronics Forum | Sat May 29 02:20:08 EDT 2010 | vinitverma
Mch Adjust > Adjust Target > Laser Unit > Nozzle Position. Here the laser will automatically detect the centre of the nozzle. Remember - It'll give you the option of using a component for the test but DON'T use any component. Let it detect the centre
Electronics Forum | Wed May 19 16:02:32 EDT 2010 | remullis
I am currently experiencing major issues when printing fine pitch parts. Pad width is .008 Even starting with a new screen, fresh paste, etc. I see where the paste is not breaking away from the screen apts consistently and when inspecting the pads I
Electronics Forum | Fri Jun 04 01:13:31 EDT 2010 | boardhouse
Hi fotis, Big difference between Cem3 & FR4 is that FR4 the glass is woven and Cem3 is sheet glass non-woven. for Multi layer product, i would not consider Cem3 due to increase chance of de-lam due to lack of weave for strength. Cem1 and Cem3 are
Electronics Forum | Sun Jun 13 10:53:20 EDT 2010 | bderks
Thank you all for responding, Pyropel might indeed be adequate and still cheap enough. Someone advised me aerogel, but we certainly can't afford that ;-) I've contacted WWW.rubber.com as well, but I'm still waiting for a reply. Why reinvent the w