Electronics Forum | Thu Mar 22 13:41:41 EST 2001 | mparker
What's the reality of the situation? Are you creating a specmanship issue here just to satisfy Class 3? Can you demonstrate that the paste volume applied to the plastic QFP's give sufficient overall fillets for mechanical and electrical properties? W
Electronics Forum | Fri Mar 23 14:13:20 EST 2001 | mnaddra
RW, I have Screened Adhesive on to several different assemblies and have found that when it is possible I get a much better result than with a dot deposition process (The green strength was greatly improved), the biggest issue I ran in to was the pr
Electronics Forum | Thu Apr 05 12:25:01 EDT 2001 | davef
Talk about bucking the trend!!! OK, OK, I know some US military work still requires RMA. You�re both correct. Cleaning decisions for RMA fluxed boards are based on customers requirements. [Some do (clean) and some don�t.] Older US military speci
Electronics Forum | Wed Apr 11 22:05:58 EDT 2001 | davef
OA pastes are more hydroscopic than NC pastes. Hydroscopic. The capacity of a material to absorb and retain moisture from the ambient air. Sometimes this is compounded if you remove paste from the frig and let it warm to room temperature, because
Electronics Forum | Tue Apr 17 10:16:42 EDT 2001 | davef
Welcome to SMTnet. Awww, those assemblers are always whining about something. Just tell him to shut-up and build the blankin� boards. Jeesh!!! We used to have copious archives on the topic on SMTnet and our friend Brian is working his fingers t
Electronics Forum | Fri Nov 16 08:10:56 EST 2001 | Matt Kehoe
Hi Dave. Sorry I have not responded. Just as I was getting into this forum activity the company I worked for (past tense) decided not to re join the SMTA and I was cut off. Anyways, you can find most of what you asked for about SIPAD on the Midwest
Electronics Forum | Wed Apr 25 16:08:24 EDT 2001 | jmills
We build a product that requires a lithium battery. There is a Smt Battery clip soldered onto two gold pads on a FR4 PCB. The battery is forced by two little clips punched out to provided downward pressure in the battery holder, enabling the lithium
Electronics Forum | Wed Apr 25 16:09:45 EDT 2001 | jmills
We build a product that requires a lithium battery. There is a Smt Battery clip soldered onto two gold pads on a FR4 PCB. The battery is forced by two little clips punched out to provided downward pressure in the battery holder, enabling the lithium
Electronics Forum | Wed Apr 25 16:12:18 EDT 2001 | jmills
We build a product that requires a lithium battery. There is a Smt Battery clip soldered onto two gold pads on a FR4 PCB. The battery is forced by two little clips punched out to provided downward pressure in the battery holder, enabling the lithium
Electronics Forum | Tue Nov 28 18:24:45 EST 2000 | rabell
When the original material was developed, we worked with a team of industry experts from a minimum of four different companies. The material was validated by them, down to the last test question. So this has not, to date, been a particularly thorny