Electronics Forum | Wed Oct 12 02:44:38 EDT 2016 | bukas
hello, I have a problem with CP45FV Neo swing mirror. The mirror it self works fine, manually controlled it moves to correct position and back. While working it also moves properly but when machine is about to check for nozzle existence at the end of
Electronics Forum | Tue Mar 07 09:35:55 EST 2017 | buckcho
hello, I have a problem with CP45FV Neo swing > mirror. The mirror it self works fine, manually > controlled it moves to correct position and back. > While working it also moves properly but when > machine is about to check for nozzle existence a
Electronics Forum | Wed Nov 02 16:36:05 EDT 2016 | ttheis
Problem was bad FCU board; replaced with FCU from another machine and swapped rom chips. Oven operates properly and communicates with PC. BTU was kind enough to supply the default usernames and passwords for wincon but they did not work. Still waiti
Electronics Forum | Mon Jan 23 08:06:52 EST 2017 | bukas
i have an issue with solder bath temperature. there is a big difference in temperature of alloy in the middle of the bath and at the ends(about 35C). i took down heating elements for inspection and they look fine. its just that most of the heat is cr
Electronics Forum | Tue Feb 14 09:10:43 EST 2017 | davef
Assuming the traces run parallel and perpendicular to each other, I'd choose one direction the traces run as "x" and the other direction for "y." Then I'd pick a unique identifier on the board to insure proper orientation. Next, I'd measure warp and
Electronics Forum | Wed Mar 01 07:48:33 EST 2017 | coryhayes89
I have an older Flexlink F1700 that I am having issues with and am hoping someone might have a fix for it. The issue is that the machine will initialize when you turn it on, meaning the belts will spin. However, it never returns to its 'home' posit
Electronics Forum | Fri May 19 09:53:40 EDT 2017 | deanm
We machine place the first part, then add two dots of dispensable solder paste to the top of the terminations, then hand place the second part on top of the first. Reflow. It works better than hand soldering after reflow. The solder paste is dispens
Electronics Forum | Tue May 23 07:02:08 EDT 2017 | bk
No matter what machine that you decide to buy some of the things you want to know especially concerning used machines are how readily available are spare parts for the machine. How hard is it to program the machine and are there programs available to
Electronics Forum | Fri Jul 07 10:55:36 EDT 2017 | capse
I have worked with a few of my customers to rework heavy LEDs. One technique that has worked; use a large flat soldering tip, apply the tip to the back side of the PCB directly under the LED. I have seen the soldering iron handle mounted in a table v
Electronics Forum | Thu Aug 10 04:31:02 EDT 2017 | leadthree
The only people that can answer what you need is UL. I worked with VDE and I do not know any company that works like that. With VDE we prepare a module according to VDE standard and do an internal pre-approval - and present it. To put something ra
.gif)
