Electronics Forum | Tue Sep 30 14:01:04 EDT 2008 | wavemasterlarry
Some fella from Honda once used a potatoe to clean his pot. Siad it was a pretty good idea that he learned from the japs he works for. There was a thread here on The Forum once if you could look it up.
Electronics Forum | Fri Nov 14 17:37:58 EST 2008 | snsmt
WHat about bad mounting? i have 2 fixtures and sometimes it would mount with no misalignment and sometimes it would. WHat could be the problem in this case/ I know the fixtures are good because they work on a different program that we have. I don't u
Electronics Forum | Mon Dec 08 17:06:54 EST 2008 | smellew
Hi Grid lock & others are ok solutions but i've tried them all the best system i received was from a company in eastern eu called cisoli ltd they supply support systems for DEK's MPM's and any placement machine i used them on DEK ELA Fuji CP642 & IP3
Electronics Forum | Mon Nov 17 21:04:09 EST 2008 | davef
Continuing with the idea of capping the via with SR1000: If you have boards in-stock that will require all the putzing around that you've doing to prevent the solder flowing through the via, consider reworking your stock with SR1000 to prevent all th
Electronics Forum | Wed Dec 10 16:00:07 EST 2008 | cisridn
Just to update. I tried using the temporary solder mask again and it worked great. I guess the first time I did not let the mask to cure long enough. Also, I inquired about have the via's plugged with SR1000 in the future and I was told by our PCB
Electronics Forum | Thu Dec 04 07:22:54 EST 2008 | wavemasterlarry
Looks like my message got cut out. What I meant to say is I like balloons but you can't use em at work next to pcbs cause of the static. You gott abe sencable about stuff like that. Always where your ground straps and you can were what ya want.
Electronics Forum | Fri Dec 05 14:45:39 EST 2008 | wrongway
I have an 1 year old advantis with flexjet 3 head I tried using the on the head cameras with little luck using the upward looking cameras and putting the part defanition as a QFP using gull-wing leads mesuring the part as is seem to work best thats w
Electronics Forum | Tue Dec 09 14:03:05 EST 2008 | pms
Steve, We use stencils for applying adhesives to PCB's, with our DEK Proflow system. Works well for us. Once in a while, we have to manually add adhesive to a specific location depending on the component height. Vary rare though. You shouldn't have
Electronics Forum | Tue Dec 09 14:17:13 EST 2008 | dphilbrick
We exclusively use a printer to do glue these days but keep in mind there are times when glue and paste work best. Things like poor layout (ie shadowing) or tall parts that may shadow themselves or a wave solder machine that is not particularly good
Electronics Forum | Wed Dec 10 16:15:24 EST 2008 | terryl
on the front end in design, minimize the pth connections to ground planes. this takes alot of work by the pcb designer and the approval of the design engineer. connect maximum of 4 ground planes to pth, minimum 1 plane. use spoked connections. ev
